how to reset the maintenance light on Toyota Highlander XU70 (2020-Present)

Toyota Highlander XU70 (2020-Present)

Error Codes

5-10 minutes

Time

easy

Difficulty

low

Severity

2 min read

384 words

Problem Statement

Learn how to reset the maintenance light on your 2020-present Toyota Highlander XU70. Step-by-step guide for a quick and easy reset.

Affected Component

Electrical

Estimated Time

5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in 'Park' or 'Neutral' with the parking brake engaged when performing the reset.

Symptoms

•Maintenance light illuminated on the dashboard
•No other warning lights present
•Vehicle operates normally aside from the maintenance reminder

Diagnostic Steps

1
Ensure the vehicle is in the 'ON' position without starting the engine.
2
Locate the odometer display on the instrument panel.
3
Press the 'Trip' button to navigate to the odometer display if necessary.
4
Turn off the ignition completely.
5
While holding the 'Trip' button, turn the ignition back to the 'ON' position.
6
Continue to hold the 'Trip' button until the maintenance light flashes and then turns off.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None required specifically for the reset process.

Parts Required

•None required specifically for the reset process.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is in the 'ON' position without starting the engine.
2
Locate the odometer display on the instrument panel.
3
Press the 'Trip' button to navigate to the odometer display if necessary.
4
Turn off the ignition completely.
5
While holding the 'Trip' button, turn the ignition back to the 'ON' position.
6
Continue to hold the 'Trip' button until the maintenance light flashes and then turns off.

Solution

1. Preparation

Ensure that the vehicle is parked on a level surface and the ignition is turned off.
Have the key fob or vehicle key ready.

2. Ignition Position

Insert the key into the ignition or have the key fob in the vehicle.
Turn the ignition to the "ON" position without starting the engine.

Find the "Trip" button on the instrument cluster.
Press the "Trip" button until the odometer is displayed.

4. Resetting the Maintenance Light

With the odometer displayed, turn the ignition off completely.
Press and hold the "Trip" button while turning the ignition back to the "ON" position.
Keep holding the "Trip" button until the maintenance light begins to flash and then turns off.

5. Finalizing

Release the "Trip" button.
Turn off the ignition and then start the vehicle to ensure the maintenance light is no longer illuminated.