how to fix the TPMS light staying on in my Toyota Highlander XU70 (2020-Present)?

Toyota Highlander XU70 (2020-Present)

Error Codes

1-2 hours

Time

medium

Difficulty

medium

Severity

4 min read

610 words

Problem Statement

Learn how to diagnose and fix the TPMS light staying on in your 2020-present Toyota Highlander XU70. Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Electrical

Estimated Time

1-2 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always disconnect the battery before working on electrical systems.
•Allow the vehicle to cool before performing any work on brakes or tires.

Symptoms

•TPMS warning light illuminated on the dashboard
•Inconsistent tire pressure readings
•Low tire pressure in one or more tires
•Potential tire pressure loss
•Warning message regarding tire pressure on the display

Diagnostic Steps

1
Check Tire Pressures: Use a tire pressure gauge to confirm that all tires are inflated to the manufacturer's recommended PSI.
2
Inspect Tires for Damage: Visually inspect each tire for punctures, cuts, or other damage that could cause air loss.
3
Scan for TPMS Fault Codes: Utilize an OBD-II scanner to check for any fault codes related to the TPMS system.
4
Relearn TPMS Sensors: Verify if the TPMS sensors need to be reset or relearned after tire rotation or replacement.
5
Inspect TPMS Sensors: Check each wheel sensor for physical damage or corrosion, especially after a tire change or repair.
6
Check Battery Health of TPMS Sensors: If equipped with battery-operated sensors, ensure they are functioning and have sufficient battery life.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Tire pressure gauge
•OBD-II scanner
•Jack and jack stands
•Socket set
•Torque wrench

Parts Required

•Replacement TPMS sensors
•Tire sealant

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Check Tire Pressures: Use a tire pressure gauge to confirm that all tires are inflated to the manufacturer's recommended PSI.
2
Inspect Tires for Damage: Visually inspect each tire for punctures, cuts, or other damage that could cause air loss.
3
Scan for TPMS Fault Codes: Utilize an OBD-II scanner to check for any fault codes related to the TPMS system.
4
Relearn TPMS Sensors: Verify if the TPMS sensors need to be reset or relearned after tire rotation or replacement.
5
Inspect TPMS Sensors: Check each wheel sensor for physical damage or corrosion, especially after a tire change or repair.
6
Check Battery Health of TPMS Sensors: If equipped with battery-operated sensors, ensure they are functioning and have sufficient battery life.

Solution

1. Preparation

Gather necessary tools and parts.
Tools Required: Tire pressure gauge, OBD-II scanner, jack and jack stands, socket set, torque wrench.
Parts Required: Replacement TPMS sensors (if damaged), tire sealant (if applicable).
Ensure the vehicle is parked on a flat surface and the ignition is off.

2. Check and Adjust Tire Pressures

Sub-steps:
- Remove valve caps from each tire.
- Use the tire pressure gauge to check the pressure of each tire.
- Inflate or deflate tires to reach the recommended PSI as indicated on the driver’s door jamb sticker.
- Replace valve caps securely.

3. Inspect and Replace TPMS Sensors

Sub-steps:
- Safely lift the vehicle using a jack and secure with jack stands.
- Remove the wheel from the hub using the socket set.
- Locate the TPMS sensor on the inner side of the wheel.
- Inspect the sensor for damage and corrosion. If damaged, proceed to replace.
- To replace, remove the old sensor and install the new one according to the manufacturer’s specifications.
- Reinstall the wheel and tighten lug nuts to the specified torque value (typically 76-80 ft-lbs).

4. Relearn TPMS Sensors

Sub-steps:
- Turn the ignition to the "ON" position without starting the engine.
- Use the OBD-II scanner to perform a TPMS reset or follow the manual procedure to relearn the sensors.
- Drive the vehicle for a short distance (approximately 10-15 minutes) to allow the system to detect the new sensor data.