FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
What are the signs of a failing starter motor in a 2020 Toyota Highlander? - Toyota Highlander
Home/Cars/Toyota/Highlander/Fourth Generation (2020-present)/What are the signs of a failing starter motor in a 2020 Toyota Highlander?

What are the signs of a failing starter motor in a 2020 Toyota Highlander?

Toyota Highlander Fourth Generation (2020-present)

Error Codes
2-3 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
4 min read
609 words

Problem Statement

Learn how to diagnose and replace a failing starter motor in a 2020 Toyota Highlander with detailed symptoms, diagnostic steps, and repair instructions.

Affected Component
starter motor
Estimated Time
2-3 hours

Symptoms

  • •Clicking Noise
  • •No Sound at All
  • •Intermittent Starting
  • •Slow Cranking
  • •Burning Smell

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Digital Multimeter
  • •Wrench Set
  • •Screwdriver Set
  • •Battery Tester
  • •Jumper Cables
  • •Socket Set
  • •Torque Wrench
  • •Safety Glasses
  • •Gloves

Additional Information

Affected Component
starter motor
Estimated Time
2-3 hours
Difficulty
medium
Severity
medium
Tools Required
9 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnosing a failing starter motor in a 2020 Toyota Highlander involves observing specific symptoms, performing diagnostic steps, and using the right tools. Below are detailed instructions to help you identify and address starter motor issues.

Signs of a Failing Starter Motor
  1. Clicking Noise: When you turn the ignition key, you may hear a single click or a series of rapid clicks.
  2. No Sound at All: The engine doesn’t make any noise when you try to start it; the dashboard lights may still illuminate.
  3. Intermittent Starting: The vehicle starts sometimes but not others, indicating that the starter may be failing.
  4. Slow Cranking: The engine cranks very slowly or struggles to turn over when starting.
  5. Burning Smell: A burning smell may indicate that the starter motor is overheating due to excessive current draw.

Tools Required

  • Digital Multimeter
  • Wrench Set
  • Screwdriver Set
  • Battery Tester
  • Jumper Cables
  • Socket Set
  • Torque Wrench
  • Safety Glasses
  • Gloves

Steps to Diagnose

  1. Visual Inspection:

    • Open the hood and visually inspect the starter motor and its connections.
    • Check for loose, corroded, or damaged wiring.
  2. Battery Condition Check:

    • Use a battery tester to ensure the battery is fully charged.
    • A weak battery can mimic starter motor issues. Charge or replace the battery if necessary.
  3. Voltage Test at Starter:

    • Set the multimeter to DC voltage.
    • With the key in the "Start" position, measure the voltage at the starter motor's terminal.
    • You should see a voltage reading close to the battery voltage. If the reading is significantly lower, there may be an issue with the wiring or ignition switch.
  4. Bench Test the Starter:

    • Remove the starter motor from the vehicle.
    • Using jumper cables, connect the starter directly to a known good battery.
    • The starter should spin freely and produce a strong whirring noise. If it does not, the starter is likely faulty.
  5. Load Test the Starter:

    • If the starter spins but slowly, perform a load test using a multimeter to check for excessive resistance within the starter windings.
Repair Instructions

If the Starter Motor is Failing

  1. Preparation:

    • Ensure the vehicle is in park (or neutral) with the parking brake engaged.
    • Disconnect the negative battery terminal to avoid any electrical shorts.
  2. Remove the Starter Motor:

    • Locate the starter motor (it is usually mounted on the transmission bell housing).
    • Remove any electrical connectors, noting their positions for reinstallation.
    • Unbolt the starter motor using the appropriate socket size.
    • Carefully remove the starter from the engine bay.
  3. Install the New Starter Motor:

    • Position the new starter motor in place of the old one.
    • Bolt it back to the transmission bell housing, ensuring that it is secured properly.
    • Reconnect the electrical connectors, ensuring they are tight and secure.
  4. Reconnect the Battery:

    • Reattach the negative battery terminal.
    • Ensure all connections are tight and secure.
  5. Test the New Starter:

    • Start the vehicle to ensure that the new starter motor is functioning properly.
    • Listen for any abnormal noises and check that the engine starts smoothly.
  6. Final Steps:

    • If everything is functioning correctly, close the hood and perform a final visual inspection to ensure that all tools are removed from the engine bay.
Conclusion

By following these detailed steps, you should be able to diagnose and replace a failing starter motor in a 2020 Toyota Highlander. Always prioritize safety, and if you're unsure at any step, consult a professional mechanic for assistance.