What are the common issues with the tire pressure monitoring system in the 2020 Highlander?

Toyota Highlander Fourth Generation (2020-present)

Error Codes

1-2 hours

Time

medium

Difficulty

medium

Severity

4 min read

689 words

Problem Statement

Learn about common issues with the Tire Pressure Monitoring System (TPMS) in the 2020 Toyota Highlander, including symptoms, diagnostic steps, and repair instructions.

Affected Component

Tire Pressure Monitoring System (TPMS)

Estimated Time

1-2 hours

Symptoms

•TPMS Warning Light Illuminates
•Inaccurate Pressure Readings
•No Pressure Display
•Intermittent Alerts

Diagnostic Steps

1
Visual Inspection
2
Check Tire Pressure
3
Scan for Diagnostic Trouble Codes (DTCs)
4
Relearn Procedure

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Digital Tire Pressure Gauge
•OBD-II Scanner
•TPMS Tool
•Jack and Jack Stands
•Torque Wrench

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

Common Issues with the Tire Pressure Monitoring System (TPMS) in the 2020 Toyota Highlander

The Tire Pressure Monitoring System (TPMS) in the 2020 Toyota Highlander can experience a variety of issues that may affect its performance and accuracy. Below are common symptoms, diagnostic steps, tools required, and repair instructions for these issues.

Tools Required

Digital Tire Pressure Gauge: For accurate tire pressure measurement.
OBD-II Scanner: To read and clear diagnostic trouble codes.
TPMS Tool: To program or relearn the TPMS sensors if necessary.
Jack and Jack Stands: For lifting the vehicle to inspect and service the tires.
Torque Wrench: To ensure lug nuts are properly torqued after tire service.

Repair Instructions

1. Fixing Low Tire Pressure

Step 1: Use a digital tire pressure gauge to check the pressure of each tire.
Step 2: Inflate any under-inflated tires to the recommended levels (usually found on the driver’s door jamb).
Step 3: After inflating, drive the vehicle for about 10 minutes to allow the TPMS to recalibrate.
Step 4: Check if the TPMS warning light turns off.

2. Replacing a Faulty TPMS Sensor

Step 1: Identify the faulty sensor using an OBD-II scanner.
Step 2: Remove the tire from the wheel using a jack and appropriate tools.
Step 3: Unscrew the valve stem that houses the TPMS sensor from the wheel.
Step 4: Replace the old sensor with a new one, ensuring that it is compatible with the 2020 Highlander.
Step 5: Reinstall the valve stem and tire, ensuring the lug nuts are torqued to specifications.
Step 6: Perform a TPMS relearn procedure to sync the new sensor with the vehicle’s system.

3. Resetting the TPMS System

Step 1: If the TPMS warning light persists after addressing tire pressure and sensor issues, perform a manual reset.
Step 2: Turn the ignition to the "ON" position without starting the engine.
Step 3: Press and hold the TPMS reset button (located under the steering column or in the glove box) until the TPMS light blinks three times.
Step 4: Release the button and start the vehicle. The TPMS light should turn off after a few minutes of driving.

4. Reprogramming TPMS Sensors

Step 1: If tire rotations or replacements were made, use a TPMS tool to initiate the sensor relearn process.
Step 2: Follow the tool’s instructions to trigger each sensor as per the manufacturer’s specifications.
Step 3: Verify the sensors are properly communicating with the vehicle's TPMS system.

Conclusion

Addressing TPMS issues in a 2020 Toyota Highlander involves a combination of visual inspections, tire pressure checks, and potentially replacing or reprogramming TPMS sensors. By following the diagnostic steps and repair instructions outlined above, most TPMS-related problems can be resolved effectively. If issues persist after following these steps, it may be necessary to consult a professional technician or dealership for further diagnosis and repair.