FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
How to troubleshoot the key fob not working for a 2023 Toyota Highlander? - Toyota Highlander
Home/Cars/Toyota/Highlander/Fourth Generation (2020-present)/How to troubleshoot the key fob not working for a 2023 Toyota Highlander?

How to troubleshoot the key fob not working for a 2023 Toyota Highlander?

Toyota Highlander Fourth Generation (2020-present)

Error Codes
1-2 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
4 min read
651 words

Problem Statement

Learn how to troubleshoot and fix key fob issues for your 2023 Toyota Highlander with step-by-step instructions and required tools.

Affected Component
key fob
Estimated Time
1-2 hours

Symptoms

  • •Key Fob Not Unlocking Doors
  • •Key Fob Not Starting the Engine
  • •Intermittent Functionality

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •CR2032 battery (replacement)
  • •Small flathead screwdriver
  • •OBD-II scanner
  • •Fuse puller or needle-nose pliers
  • •Screwdrivers
  • •Socket set
  • •replacement receiver module

Additional Information

Affected Component
key fob
Estimated Time
1-2 hours
Difficulty
medium
Severity
medium
Tools Required
7 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Troubleshooting Key Fob Not Working for 2023 Toyota Highlander

If your 2023 Toyota Highlander's key fob is not working, follow these detailed steps to diagnose and potentially resolve the issue.

Repair Instructions

  1. Replace Key Fob Battery

    • Follow the steps outlined in the battery check above if the battery needs replacement.

  2. Reprogram the Key Fob

    • Follow the steps outlined in the reprogramming section to ensure proper communication between the fob and the vehicle.

  3. Replace Keyless Entry Receiver (if necessary)

    • Tools Required: Screwdrivers, socket set, replacement receiver module
    • Instructions:
      1. Disconnect the negative battery terminal to avoid electrical short.
      2. Remove any necessary trim panels to access the keyless entry module (typically located behind the dashboard).
      3. Disconnect the wiring harness from the receiver and remove it from its mounting.
      4. Install the new receiver module and reconnect the wiring harness.
      5. Reassemble the trim panels and reconnect the battery.
      6. Test the key fob functionality.
Conclusion

If the key fob still does not work after all troubleshooting steps, it may be necessary to visit a Toyota dealership or a qualified automotive locksmith for further diagnosis and assistance. They can check for advanced issues or replace the key fob if needed.