How do I fix the problem of my 2020 Toyota Highlander's sunroof not closing?

Toyota Highlander Fourth Generation (2020-present)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

4 min read

645 words

Problem Statement

Learn how to diagnose and repair the sunroof issue on your 2020 Toyota Highlander with detailed steps and required tools.

Affected Component

sunroof

Estimated Time

2-4 hours

Symptoms

•Sunroof does not respond
•No noise
•Partial closure
•Electrical issues

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Flathead screwdriver
•Phillips screwdriver
•Torx screwdriver set
•Multimeter
•Fuse puller or needle-nose pliers
•Soft cloth for cleaning

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Fixing the Sunroof Not Closing on a 2020 Toyota Highlander

Step 1: Check for Obstructions

Visual Inspection: Examine the sunroof track for any debris or obstructions that may be blocking the sunroof from closing.
Manual Test: Gently try to pull the sunroof closed by hand (if it is only partially open).

Step 2: Test the Sunroof Switch

Switch Operation: Press the sunroof switch in both the tilt and slide positions. Observe if there’s any response.
Observation: If the switch feels loose or does not click, it may be faulty.

Step 3: Inspect the Fuse

Locate the Fuse Box: Refer to the owner’s manual to locate the fuse box (usually under the dashboard or in the engine compartment).
Check the Sunroof Fuse: Use a fuse puller or needle-nose pliers to remove and inspect the sunroof fuse (check for a blown fuse).
Replace if Necessary: If the fuse is blown, replace it with one of the same amperage.

Step 4: Check for Power at the Switch

Tools Required: Multimeter, wire harness diagrams from the service manual.
Access the Switch: Remove the trim panel around the sunroof switch.
Test for Voltage: Use the multimeter to check for voltage at the switch connector. If there’s power, the switch is likely functional.

Step 5: Check the Sunroof Motor

Tools Required: Torx or Phillips screwdriver, multimeter, wiring harness diagram.
Access the Motor: Remove the headliner (carefully) to access the sunroof motor located at the rear of the sunroof assembly.
Test the Motor: Disconnect the motor and check for continuity using a multimeter.
Manual Operation: If possible, apply 12V directly to the motor terminals to test its operation.

Repair Instructions

Repairing the Sunroof

If Obstruction Found:

Remove Debris: Clear any debris or obstruction in the sunroof track.
Clean the Track: Use a soft cloth and a mild cleaner to clean the track.

If Fuse is Blown:

Replace the Fuse: Install a new fuse of the same amperage.
Test the Sunroof: Recheck the operation of the sunroof after replacing the fuse.

If the Switch is Faulty:

Replace the Switch: Order a replacement switch from a Toyota dealer or an authorized parts supplier.
Remove Trim: Carefully remove the trim panel to access the switch.
Disconnect the Old Switch: Unplug the faulty switch and connect the new switch.
Reinstall Trim: Reattach the trim panel and test the sunroof.

If the Motor is Faulty:

Replace the Sunroof Motor: Obtain a replacement motor.
Remove the Old Motor: Disconnect the wiring and remove the mounting screws.
Install the New Motor: Secure the new motor in place, reconnect the wiring, and ensure it is mounted correctly.
Reassemble: Reinstall the headliner and any other components removed during the process.

Final Testing

After completing the above repairs, test the sunroof multiple times in both directions (open and close) to ensure proper operation. Observe for any unusual noises during operation.

Tools Required

Flathead and Phillips screwdrivers
Torx screwdriver set
Multimeter
Fuse puller or needle-nose pliers
Soft cloth for cleaning
Replacement parts as needed (fuse, switch, motor)

By following these detailed steps, you should be able to diagnose and fix the sunroof issue in your 2020 Toyota Highlander. If problems persist, consider seeking the assistance of a professional automotive technician.

How do I fix the problem of my 2020 Toyota Highlander's sunroof not closing?

Problem Statement

Symptoms

Diagnostic Steps

Solution

💡 Expert Tip

Verification

Prevention Tips

Tools & Equipment Required

Related Faults

Share this solution

Comments

How do I fix the problem of my 2020 Toyota Highlander's sunroof not closing?

Problem Statement

Symptoms

Diagnostic Steps

Solution

Fixing the Sunroof Not Closing on a 2020 Toyota Highlander

If Obstruction Found:

If Fuse is Blown:

If the Switch is Faulty:

If the Motor is Faulty:

💡 Expert Tip

Verification

Prevention Tips

Tools & Equipment Required

Related Faults

Share this solution

Comments

Fixing the Sunroof Not Closing on a 2020 Toyota Highlander

If Obstruction Found:

If Fuse is Blown:

If the Switch is Faulty:

If the Motor is Faulty: