how to reset the tire pressure light on Toyota Highlander Third Generation (2014-2019)

Toyota Highlander Third Generation (2014-2019)

Error Codes

10-15 minutes

Time

easy

Difficulty

medium

Severity

2 min read

369 words

Problem Statement

Learn how to reset the tire pressure light on your 2014-2019 Toyota Highlander. Step-by-step guide with diagnostic steps and verification tips.

Affected Component

Electrical

Estimated Time

10-15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always check tire pressure when tires are cold for accurate readings.

Symptoms

•Tire pressure warning light illuminated on the dashboard
•Potentially incorrect tire pressure readings
•Warning message displayed on the Multi-Information Display (MID)

Diagnostic Steps

1
Check all tire pressures using a reliable tire pressure gauge.
2
Inflate or deflate tires to the manufacturer's recommended pressure.
3
Drive the vehicle for a short distance (about 10 minutes) to see if the light resets automatically.
4
If the light remains on, locate the tire pressure reset button in the vehicle.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Tire pressure gauge

Parts Required

•None required for the reset procedure

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Check all tire pressures using a reliable tire pressure gauge.
2
Inflate or deflate tires to the manufacturer's recommended pressure.
3
Drive the vehicle for a short distance (about 10 minutes) to see if the light resets automatically.
4
If the light remains on, locate the tire pressure reset button in the vehicle.

Solution

1. Preparation

Ensure all tires are inflated to the correct pressure.
Gather necessary tools: tire pressure gauge (if not already available).

2. Locate the Reset Button

Location: The tire pressure reset button is typically located under the steering wheel or on the lower dashboard near the driver's side.
Action: Identify the button, which may be labeled as “SET” or “TPMS reset.”

3. Reset the Tire Pressure Light

Action: With the vehicle in the "ON" position (do not start the engine), press and hold the reset button until the tire pressure light blinks three times and then turns off.
Duration: Hold the button for about 3 seconds.

4. Verify the Reset

Action: Start the vehicle and check if the tire pressure light remains off.
Drive: If necessary, drive the vehicle for a short distance to ensure the system recalibrates.