how to reset the service light on my Toyota Highlander Third Generation (2014-2019)

Toyota Highlander Third Generation (2014-2019)

Error Codes

5-10 minutes

Time

easy

Difficulty

low

Severity

2 min read

361 words

Problem Statement

Learn how to reset the service light on your 2014-2019 Toyota Highlander. Step-by-step guide to ensure your maintenance reminders are cleared.

Affected Component

Electrical

Estimated Time

5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in park and on a flat surface before performing the reset.

Symptoms

•Service light illuminated on the dashboard
•Maintenance reminder displayed on the multi-information display
•No other performance issues affecting vehicle operation

Diagnostic Steps

1
Ensure the vehicle is in the 'ON' position without starting the engine.
2
Locate the trip meter reset button on the instrument cluster.
3
Confirm that the odometer is displaying the total mileage and not the trip mileage.
4
Turn the ignition off and then back to the 'ON' position while holding the trip meter reset button.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None

Parts Required

•None

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is in the 'ON' position without starting the engine.
2
Locate the trip meter reset button on the instrument cluster.
3
Confirm that the odometer is displaying the total mileage and not the trip mileage.
4
Turn the ignition off and then back to the 'ON' position while holding the trip meter reset button.

Solution

1. Preparation

Gather necessary tools (if needed): none required for this process.
Ensure the vehicle is parked on a flat surface and the engine is off.

2. Resetting the Service Light

Turn on Ignition: Turn the ignition to the "ON" position without starting the engine.
Access Odometer: Make sure the odometer is showing the total mileage (not trip A or B).
Reset Button: Press and hold the trip meter reset button located on the instrument cluster.
Cycle Ignition: While holding the reset button, turn the ignition off and then back to the "ON" position.
Observe Reset: Continue holding the reset button until the odometer displays “000000” or the service light goes off, indicating the reset is successful.

3. Final Steps

Release the trip meter reset button.
Turn the ignition off and then start the engine to verify the service light is no longer illuminated.