how to reset the maintenance light on a Toyota Highlander Third Generation (2014-2019)

Toyota Highlander Third Generation (2014-2019)

Error Codes

5 minutes

Time

easy

Difficulty

low

Severity

2 min read

394 words

Problem Statement

Learn how to reset the maintenance light on a Toyota Highlander (2014-2019) with this step-by-step guide. Quick and easy instructions for a hassle-free reset.

Affected Component

Electrical

Estimated Time

5 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in 'P' (Park) or 'N' (Neutral) to prevent any unintended movement while performing the reset.

Symptoms

•Maintenance light illuminated on the dashboard
•Vehicle displays a reminder for scheduled maintenance
•No changes in driving performance or vehicle functionality

Diagnostic Steps

1
Ensure the vehicle is in the 'OFF' position.
2
Press and hold the trip meter reset button on the dashboard.
3
Turn the ignition key to the 'ON' position without starting the engine.
4
Continue holding the trip meter reset button until the maintenance light resets (approximately 10 seconds).
5
Release the trip meter reset button.
6
Turn the ignition back to the 'OFF' position and then start the vehicle to verify the light is off.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None

Parts Required

•None

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is in the 'OFF' position.
2
Press and hold the trip meter reset button on the dashboard.
3
Turn the ignition key to the 'ON' position without starting the engine.
4
Continue holding the trip meter reset button until the maintenance light resets (approximately 10 seconds).
5
Release the trip meter reset button.
6
Turn the ignition back to the 'OFF' position and then start the vehicle to verify the light is off.

Solution

1. Preparation

Ensure the vehicle is parked on a flat surface and in "OFF" position.
Gather necessary tools: none required for this procedure.

2. Resetting the Maintenance Light

Locate the Trip Meter Reset Button
- Find the trip meter reset button on the dashboard, usually located near the speedometer.
Hold the Trip Meter Reset Button
- Press and hold the button firmly.
Turn the Ignition to "ON"
- While holding the button, turn the ignition key to the "ON" position (do not start the engine).
Wait for the Reset Confirmation
- Keep holding the button until the maintenance light blinks and then turns off. This usually takes about 10 seconds.
Release the Button
- Once the light has reset, release the trip meter reset button.
Verify the Reset
- Turn the ignition to the "OFF" position and then start the vehicle to check if the maintenance light is no longer illuminated.