FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to check the transmission fluid level in my Toyota Highlander Third Generation (2014-2019) - Toyota Highlander
Home/Cars/Toyota/Highlander/Third Generation (2014-2019)/how to check the transmission fluid level in my Toyota Highlander Third Generation (2014-2019)

how to check the transmission fluid level in my Toyota Highlander Third Generation (2014-2019)

Toyota Highlander Third Generation (2014-2019)

Error Codes
30 minutes
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
489 words

Problem Statement

Learn how to check the transmission fluid level in your 2014-2019 Toyota Highlander. Step-by-step guide with diagnostic steps and maintenance tips.

Affected Component
Transmission
Estimated Time
30 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure the engine is running to check the fluid level accurately; do not attempt when the engine is cold for accurate readings.

Symptoms

  • •Difficulty shifting gears
  • •Slipping transmission
  • •Unusual noises from the transmission
  • •Overheating transmission
  • •Warning lights related to the transmission system

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Clean rags
  • •Funnel
  • •Correct transmission fluid

Parts Required

  • •Toyota-approved transmission fluid

Additional Information

Affected Component
Transmission
Estimated Time
30 minutes
Difficulty
medium
Severity
medium
Tools Required
3 items
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Tools Required: Clean rags, funnel, and the correct transmission fluid (refer to the owner’s manual for specifications).
  • Ensure the vehicle is on a level surface and the engine is at operating temperature.
2. Check Fluid Level
  • Step 1: Open the hood and locate the transmission dipstick.
  • Step 2: Pull the dipstick out and wipe it with a clean rag to remove any fluid.
  • Step 3: Reinsert the dipstick fully back into the tube to ensure an accurate reading.
  • Step 4: Remove the dipstick again and observe the fluid level; it should be within the "Full" range.
  • Step 5: If the fluid level is below the "Low" mark, proceed to add fluid.
3. Adding Transmission Fluid
  • Step 1: Using a funnel, add the recommended type of transmission fluid slowly into the dipstick tube.
  • Step 2: Add fluid in small increments, checking the level frequently to avoid overfilling.
  • Step 3: Once the fluid is at the correct level, replace the dipstick securely.