FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how do I reset the tire pressure light on my Toyota Highlander Third Generation (2014-2019) - Toyota Highlander
Home/Cars/Toyota/Highlander/Third Generation (2014-2019)/how do I reset the tire pressure light on my Toyota Highlander Third Generation (2014-2019)

how do I reset the tire pressure light on my Toyota Highlander Third Generation (2014-2019)

Toyota Highlander Third Generation (2014-2019)

Error Codes
30 minutes
Time
easy
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
2 min read
400 words

Problem Statement

Learn how to reset the tire pressure light on your 2014-2019 Toyota Highlander. Step-by-step guide with diagnostic steps and safety tips.

Affected Component
Electrical
Estimated Time
30 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Always check tire pressure when tires are cold for accurate readings.

Symptoms

  • •Tire pressure warning light illuminated on the dashboard
  • •Potentially low tire pressure in one or more tires
  • •Unusual tire wear patterns
  • •Poor handling or ride quality if tires are significantly under-inflated

Diagnostic Steps

  1. 1
  2. 2
  3. 3

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Tire pressure gauge
  • •Air compressor

Parts Required

  • •None

Additional Information

Affected Component
Electrical
Estimated Time
30 minutes
Difficulty
easy
Severity
medium
Tools Required
2 items
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Tools Required: Tire pressure gauge, air compressor (if needed).
  • Ensure all tires are inflated to the correct pressure as specified on the driver’s door jamb.
2. Resetting the Tire Pressure Light

  1. Turn on the Ignition

    • Insert the key and turn it to the "On" position without starting the engine.

  2. Locate the Tire Pressure Reset Button

    • The button is usually found beneath the steering wheel or on the dash. Refer to the owner’s manual if it is difficult to locate.

  3. Press and Hold the Reset Button

    • Press and hold the tire pressure reset button until the tire pressure light blinks three times, then release the button.

  4. Turn Off the Ignition

    • Turn the ignition off completely.

  5. Start the Engine

    • Turn the ignition back on and start the engine to check if the warning light has turned off.
3. Drive the Vehicle
  • Drive the vehicle for about 10 minutes to ensure the system recalibrates and confirms the tire pressures.