why does my Toyota Corolla E170 (2013-2019) transmission slip when shifting

Toyota Corolla E170 (2013-2019)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

516 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix transmission slipping in Toyota Corolla E170 (2013-2019). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Transmission

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems.
•Allow the engine to cool before opening the transmission or draining fluids.

Symptoms

•Transmission slips while shifting between gears
•Unusual engine revving without corresponding vehicle acceleration
•Delay in engaging gears after shifting
•Check engine light illuminated or transmission warning light on the dashboard
•Fluid leaks under the vehicle

Diagnostic Steps

1
Check the transmission fluid level and condition using the dipstick.
2
Scan the vehicle's onboard computer for any diagnostic trouble codes (DTCs).
3
Inspect the transmission fluid for contamination or burning smell.
4
Check for any visible leaks around the transmission seals and pan.
5
Test the transmission solenoids for proper operation using a multimeter.
6
Inspect the linkage and cables connected to the transmission for wear or damage.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Socket set
•Multimeter
•Clean rags
•Torque wrench

Parts Required

•Transmission fluid (Toyota ATF WS)
•Transmission filter
•Gasket for transmission pan
•Transmission solenoids (if replacement is needed)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Check the transmission fluid level and condition using the dipstick.
2
Scan the vehicle's onboard computer for any diagnostic trouble codes (DTCs).
3
Inspect the transmission fluid for contamination or burning smell.
4
Check for any visible leaks around the transmission seals and pan.
5
Test the transmission solenoids for proper operation using a multimeter.
6
Inspect the linkage and cables connected to the transmission for wear or damage.

Solution

1. Preparation

Gather tools and materials: OBD-II scanner, socket set, multimeter, clean rags, transmission fluid.
Ensure the vehicle is on a level surface and park it securely.
Disconnect the battery to avoid electrical shorts.

2. Check and Replace Transmission Fluid

Remove the dipstick and wipe it clean.
Reinsert the dipstick and remove it again to check the fluid level; add fluid if low.
If fluid is dark or has a burnt smell, proceed to replace it:
- Drain Fluid: Remove the transmission pan bolts and carefully lower the pan to drain old fluid.
- Replace Filter: Remove the filter and install a new one.
- Reinstall Pan: Clean the pan and apply a new gasket; torque the bolts to manufacturer specifications (typically around 10-12 ft-lbs).
- Refill Fluid: Refill with the correct type and amount of new transmission fluid (typically Toyota ATF WS).

3. Inspect and Replace Solenoids (if necessary)

Locate the transmission solenoids (often accessible by removing the transmission pan).
Disconnect the electrical connectors from the solenoids.
Remove the faulty solenoid(s) and install new ones.
Reconnect the electrical connectors securely.

4. Test Drive and Monitor

Reconnect the battery and start the vehicle.
Test drive to ensure the transmission shifts smoothly without slipping.