why does my Toyota Corolla E170 (2013-2019) have excessive oil consumption?

Toyota Corolla E170 (2013-2019)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

547 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix excessive oil consumption in Toyota Corolla E170 (2013-2019). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Engine

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems
•Allow the engine to cool before starting any maintenance work

Symptoms

•Engine oil level drops significantly between oil changes
•Blue smoke emitted from the exhaust during acceleration
•Engine misfire or rough idle
•Increased engine noise due to insufficient lubrication
•Oil spots or leaks beneath the vehicle
•Check engine light may illuminate

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to identify any related issues
2
Inspect the engine oil level and condition to check for contamination or excessive consumption
3
Perform a compression test to evaluate the integrity of the cylinders and piston rings
4
Check for oil leaks by inspecting engine gaskets, seals, and the oil pan
5
Inspect the PCV (Positive Crankcase Ventilation) system for blockages or malfunctions that could lead to increased oil consumption
6
Examine the intake manifold for oil accumulation, indicating possible issues with the turbocharger (if applicable) or valve seals

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Compression tester
•Socket set
•Torque wrench
•Gasket scraper
•Pliers

Parts Required

•PCV valve
•Engine oil (correct type)
•New gaskets as needed

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to identify any related issues
2
Inspect the engine oil level and condition to check for contamination or excessive consumption
3
Perform a compression test to evaluate the integrity of the cylinders and piston rings
4
Check for oil leaks by inspecting engine gaskets, seals, and the oil pan
5
Inspect the PCV (Positive Crankcase Ventilation) system for blockages or malfunctions that could lead to increased oil consumption
6
Examine the intake manifold for oil accumulation, indicating possible issues with the turbocharger (if applicable) or valve seals

Solution

1. Preparation

Gather necessary tools and parts.
Park the vehicle on a level surface and engage the parking brake.
Disconnect the negative battery terminal to ensure safety.

2. Compression Test

Tools Required: Compression tester
Remove the spark plugs to prevent engine damage during testing.
Insert the compression tester into the spark plug hole and crank the engine for a few seconds.
Record the pressure readings for each cylinder. Compare values; they should be within manufacturer specifications.

3. Inspect and Replace PCV Valve

Tools Required: Socket set, pliers
Locate the PCV valve, typically on the valve cover or intake manifold.
Disconnect any hoses attached to the PCV valve.
Remove the old PCV valve and install a new one.
Reconnect hoses and ensure they are secure.

4. Inspect Engine Seals and Gaskets

Tools Required: Torque wrench, gasket scraper
Visibly inspect the valve cover and oil pan gaskets for leaks.
If leaks are found, remove the affected gaskets using a gasket scraper.
Clean the surfaces and install new gaskets, ensuring to torque to manufacturer specifications.

5. Monitor Oil Usage

After repairs, fill the engine with the correct type and amount of oil.
Drive the vehicle and monitor oil consumption over the next few weeks to ensure excessive consumption has ceased.