FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
why does my Toyota Corolla E170 (2013-2019) have a sweet smell coming from the engine - Toyota Corolla
Home/Cars/Toyota/Corolla/E170 (2013-2019)/why does my Toyota Corolla E170 (2013-2019) have a sweet smell coming from the engine

why does my Toyota Corolla E170 (2013-2019) have a sweet smell coming from the engine

Toyota Corolla E170 (2013-2019)

Error Codes
2-4 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
514 words

Problem Statement

Discover the causes of sweet smells from your Toyota Corolla E170's engine. Follow our guide for diagnostics, repairs, and prevention tips.

Affected Component
Cooling System
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Allow engine to cool before working on the cooling system to prevent burns.
  • •Always wear gloves and safety glasses when handling coolant due to its toxic properties.

Symptoms

  • •Sweet odor from the engine compartment
  • •Possible overheating of the engine
  • •Low coolant level in the reservoir
  • •Steam or coolant puddles under the vehicle
  • •Check engine light illuminated (if related to overheating)

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Coolant pressure tester
  • •Socket set
  • •Screwdrivers
  • •Serpentine belt tool
  • •Drain pan

Parts Required

  • •New water pump (if defective)
  • •Gasket for water pump
  • •New coolant

Additional Information

Affected Component
Cooling System
Estimated Time
2-4 hours
Difficulty
medium
Severity
medium
Tools Required
5 items
Parts Required
3 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools and parts.
  • Allow the engine to cool completely before starting work.
  • Disconnect the battery to prevent electrical shorts.
2. Inspect the Coolant System
  • Coolant Reservoir

    • Remove the coolant reservoir cap (ensure engine is cool).
    • Inspect for cracks or leaks; replace if necessary.
  • Radiator and Hoses

    • Visually inspect the radiator for corrosion or leaks.
    • Check all hoses for bulges, cracks, or loose clamps; tighten or replace as needed.
3. Pressure Test the Cooling System
  • Connect a coolant pressure tester to the radiator filler neck.
  • Pump the tester to the manufacturer’s specified pressure (typically around 15-20 psi).
  • Observe for any drops in pressure indicating leaks.
4. Replace Defective Components
  • Water Pump Replacement
    • Drain the coolant from the system.
    • Remove the serpentine belt and any components obstructing access to the water pump.
    • Unbolt the water pump and remove it from the engine block.
    • Clean the mounting surface and install a new water pump with a new gasket.
    • Reassemble all components and refill the coolant.
5. System Flush and Refill
  • Flush the cooling system using a coolant flush solution and clean water.
  • Refill with the appropriate type of coolant (Toyota recommends a 50/50 mix of long-life coolant).
  • Bleed the cooling system of air pockets.