why does my Toyota Corolla E170 (2013-2019) have a strong smell of gas

Toyota Corolla E170 (2013-2019)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

531 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix a strong gasoline smell in Toyota Corolla E170 (2013-2019). Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Fuel System

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Fuel lines are pressurized; relieve pressure by loosening the fuel filler cap before inspection.
•Disconnect the battery before working on electrical systems.
•Allow the engine to cool before inspecting fuel components.

Symptoms

•Strong gasoline odor inside or outside the vehicle
•Engine misfire or rough idle
•Decreased fuel efficiency
•Fuel leaks visible under the vehicle
•Check engine light illuminated

Diagnostic Steps

1
Inspect the fuel lines for visible cracks, leaks, or damage.
2
Check the fuel injector seals for signs of leakage.
3
Use an OBD-II scanner to check for any stored error codes related to the fuel system.
4
Inspect the fuel tank for corrosion or punctures.
5
Examine the fuel pressure regulator and related components for malfunction.
6
Look for fuel vapor leaks in the EVAP system by inspecting hoses and components.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Safety gloves
•Safety goggles
•Jack stands
•Fuel pressure gauge
•OBD-II scanner
•Socket set
•Torque wrench
•Screwdriver set

Parts Required

•Fuel line sections (if damaged)
•Fuel injector seals (if leaking)
•EVAP system components (if faulty)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect the fuel lines for visible cracks, leaks, or damage.
2
Check the fuel injector seals for signs of leakage.
3
Use an OBD-II scanner to check for any stored error codes related to the fuel system.
4
Inspect the fuel tank for corrosion or punctures.
5
Examine the fuel pressure regulator and related components for malfunction.
6
Look for fuel vapor leaks in the EVAP system by inspecting hoses and components.

Solution

1. Preparation

Tools Required: Safety gloves, safety goggles, jack stands, and a fuel pressure gauge.
Ensure the vehicle is parked on a level surface and the engine is off. Disconnect the battery to prevent any electrical issues.

2. Inspect Fuel Lines

Sub-steps:
- Lift the vehicle using a jack and secure with jack stands.
- Visually inspect all fuel lines for cracks or leaks.
- Pay attention to connections and clamps for tightness.
Safety Warning: Fuel lines are pressurized; relieve pressure by loosening the fuel filler cap before inspection.

3. Check Fuel Injectors

Sub-steps:
- Locate the fuel injectors on the engine.
- Inspect the injector seals for any signs of fuel leakage.
- If any leaks are found, remove the injector and replace the seals or the entire injector as needed.

4. Test Fuel Pressure

Sub-steps:
- Connect the fuel pressure gauge to the fuel rail.
- Start the engine and observe the pressure reading.
- Compare the reading with manufacturer specifications; a reading outside this range indicates a problem.
Tools Required: Fuel pressure gauge.

5. Inspect EVAP System

Sub-steps:
- Locate the EVAP canister and associated hoses.
- Check for cracks or disconnections in hoses.
- If any components are damaged, replace them accordingly.

6. Repair or Replace Affected Components

Sub-steps:
- Replace any damaged fuel lines, injectors, or EVAP components.
- Ensure all connections are secure and properly torqued.
- Reconnect the battery and start the engine to check for leaks.