why does my Toyota Corolla E170 (2013-2019) feel like it's jerking when shifting

Toyota Corolla E170 (2013-2019)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

507 words

Problem Statement

Learn how to diagnose and fix transmission jerking issues in Toyota Corolla E170 (2013-2019). Step-by-step guide with symptoms and repair instructions.

Affected Component

Transmission

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems.
•Allow the engine to cool before opening any fluid reservoirs.

Symptoms

•Jerking or hesitation when shifting gears
•Unusual engine RPM fluctuations
•Delayed acceleration after shifts
•Check engine light illuminated
•Poor fuel economy
•Transmission slipping or harsh engagement

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to identify any transmission or engine-related issues.
2
Check the transmission fluid level and condition (color and smell).
3
Inspect engine mounts for wear or damage that may contribute to jerking.
4
Test the throttle position sensor (TPS) for proper voltage and response.
5
Examine the air intake system for blockages or leaks.
6
Inspect the transmission control module (TCM) for faults or updates.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Socket set
•Fluid pump
•Multimeter
•Torque wrench

Parts Required

•Transmission fluid (Toyota WS)
•Throttle position sensor (if needed)
•Engine/transmission mounts (if needed)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to identify any transmission or engine-related issues.
2
Check the transmission fluid level and condition (color and smell).
3
Inspect engine mounts for wear or damage that may contribute to jerking.
4
Test the throttle position sensor (TPS) for proper voltage and response.
5
Examine the air intake system for blockages or leaks.
6
Inspect the transmission control module (TCM) for faults or updates.

Solution

1. Preparation

Gather necessary tools and parts.
Ensure the vehicle is parked on a level surface with the engine off.
Disconnect the battery to prevent electrical issues during repairs.

2. Check and Replace Transmission Fluid

Sub-steps:
1. Locate the transmission dipstick or fill plug.
2. Remove the dipstick or fill plug and check fluid levels.
3. If fluid is low or dirty, drain the old fluid using a fluid pump.
4. Replace with the manufacturer-recommended ATF (Toyota WS).
5. Recheck fluid levels and ensure they are within the specified range.

3. Inspect and Replace Engine and Transmission Mounts

Sub-steps:
1. Visually inspect engine and transmission mounts for cracks or tears.
2. If damaged, use a socket set to remove the bolts securing the mounts.
3. Replace with OEM mounts and securely tighten bolts to the manufacturer's torque specifications.
4. Reinstall any components removed for access.

4. Test and Replace Throttle Position Sensor (if necessary)

Sub-steps:
1. Locate the throttle position sensor on the throttle body.
2. Disconnect the electrical connector.
3. Use a multimeter to measure voltage and resistance according to specifications.
4. If the readings are out of range, replace the TPS with a new one.
5. Reconnect the electrical connector and clear any error codes.