FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
what does it mean if the check engine light in my Toyota Corolla E170 (2013-2019) is blinking - Toyota Corolla
Home/Cars/Toyota/Corolla/E170 (2013-2019)/what does it mean if the check engine light in my Toyota Corolla E170 (2013-2019) is blinking

what does it mean if the check engine light in my Toyota Corolla E170 (2013-2019) is blinking

Toyota Corolla E170 (2013-2019)

Error Codes
2-4 hours
Time
medium
Difficulty
high
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
4 min read
620 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix a blinking check engine light in a 2013-2019 Toyota Corolla E170. Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component
Engine
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on electrical systems.
  • •Allow the engine to cool before inspecting or working on it.

Symptoms

  • •Blinking check engine light
  • •Engine misfiring or rough running
  • •Decreased engine performance or power
  • •Increased fuel consumption
  • •Unusual engine noises
  • •Exhaust smoke or increased emissions

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Socket set
  • •Torque wrench
  • •Multimeter
  • •Fuel pressure gauge
  • •Fuel line disconnect tool

Parts Required

  • •Spark plugs
  • •Ignition coils (if defective)
  • •Fuel filter (if applicable)
  • •Fuel injectors (if clogged)
  • •O2 sensors (if defective)

Additional Information

Affected Component
Engine
Estimated Time
2-4 hours
Difficulty
medium
Severity
high
Tools Required
6 items
Parts Required
5 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather tools and parts required for the repair.
  • Park the vehicle on a flat surface and engage the parking brake.
  • Disconnect the negative battery terminal to ensure safety while working on the electrical components.
2. Address Ignition Issues
  • Tools Required: Socket set, torque wrench, multimeter.
  • Inspect and replace faulty spark plugs:
    • Remove the ignition coil covers (if applicable).
    • Unplug the ignition coils and remove them from the spark plug wells.
    • Remove the old spark plugs using a spark plug socket.
    • Inspect the spark plugs for wear or damage and replace them with new ones if necessary (Torque to manufacturer specifications).
  • Test ignition coils with a multimeter for resistance. Replace any defective coils.
3. Check Fuel System
  • Tools Required: Fuel pressure gauge, fuel line disconnect tool.
  • Test fuel pressure:
    • Connect the fuel pressure gauge to the fuel rail.
    • Turn the ignition to the "On" position (do not start the engine) and check for proper fuel pressure (refer to manufacturer specifications).
    • If pressure is low, inspect the fuel pump and filter for issues and replace if needed.
  • Inspect fuel injectors:
    • Remove the fuel rail to access the injectors.
    • Clean or replace any clogged injectors.
4. Inspect Exhaust and Sensors
  • Tools Required: Exhaust pipe cutter, socket set.
  • Check for exhaust leaks:
    • Visually inspect the exhaust system for cracks or holes.
    • Use a smoke machine to detect leaks if necessary.
    • Repair or replace damaged sections of the exhaust.
  • Test and replace faulty sensors:
    • Use a multimeter to test the MAF and O2 sensors.
    • Replace any sensors that do not meet specifications.