my Toyota Corolla E170 (2013-2019) won't go into gear what to check

Toyota Corolla E170 (2013-2019)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

554 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix transmission issues in the 2013-2019 Toyota Corolla E170. Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Transmission

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical components.
•Ensure the engine is cool to avoid burns.
•Lift the vehicle securely using jack stands.
•Ensure the vehicle is stationary and secure.

Symptoms

•Gear shifter is unresponsive or stuck
•Grinding noise when attempting to shift
•Dashboard warning lights illuminated (e.g., check engine light)
•Fluid leakage under the vehicle
•Engine revs without engaging the transmission
•Transmission fluid is discolored or burnt

Diagnostic Steps

1
Check the transmission fluid level and condition.
2
Inspect the gear shift linkage for misalignment or damage.
3
Scan for error codes using an OBD-II scanner.
4
Examine the clutch system (if manual transmission) for proper engagement.
5
Inspect the transmission control module for faults.
6
Check for any visible leaks in the transmission system.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Wrench set
•Pliers
•Brake bleeder kit
•Socket set
•Multimeter

Parts Required

•Transmission fluid (if needed)
•Clutch fluid (if needed)
•Transmission control module (if required)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Check the transmission fluid level and condition.
2
Inspect the gear shift linkage for misalignment or damage.
3
Scan for error codes using an OBD-II scanner.
4
Examine the clutch system (if manual transmission) for proper engagement.
5
Inspect the transmission control module for faults.
6
Check for any visible leaks in the transmission system.

Solution

1. Preparation

Gather necessary tools and parts.
Ensure the vehicle is parked on a level surface and the engine is off.
Disconnect the battery to prevent electrical shorts.

2. Check Transmission Fluid

Sub-steps:
- Remove the transmission dipstick.
- Wipe the dipstick clean, reinsert it, and remove it again to check fluid level.
- Inspect fluid color and smell; it should be bright red and not burnt.
Tools Required: None
Safety Warnings: Ensure the engine is cool to avoid burns.

3. Inspect Gear Shift Linkage

Sub-steps:
- Locate the gear shift linkage under the vehicle.
- Check for any loose bolts or damaged components.
- Adjust or replace linkage as necessary.
Tools Required: Wrench set, pliers
Safety Warnings: Lift the vehicle securely using jack stands.

4. Scan for Error Codes

Sub-steps:
- Connect an OBD-II scanner to the vehicle's diagnostic port.
- Retrieve and document any error codes displayed.
- Refer to a repair manual for specific codes related to transmission issues.
Tools Required: OBD-II scanner
Safety Warnings: None required.

5. Examine Clutch System (for Manual Transmission)

Sub-steps:
- Inspect the clutch pedal for proper engagement.
- Check the clutch fluid level and condition.
- If needed, bleed the clutch system to remove air.
Tools Required: Brake bleeder kit, wrench
Safety Warnings: Ensure the vehicle is stationary and secure.

6. Inspect Transmission Control Module

Sub-steps:
- Remove the access panel to the TCM.
- Check for damaged wiring or loose connections.
- Replace the TCM if necessary.
Tools Required: Socket set, multimeter
Safety Warnings: Disconnect the battery before working on electrical components.