how to replace the windshield wiper blades on my Toyota Corolla E170 (2013-2019)

Toyota Corolla E170 (2013-2019)

Error Codes

15-30 minutes

Time

easy

Difficulty

medium

Severity

3 min read

403 words

Problem Statement

Learn how to replace windshield wiper blades on a 2013-2019 Toyota Corolla E170. Step-by-step guide with symptoms, diagnostic steps, and installation instructions.

Affected Component

Body/Interior

Estimated Time

15-30 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the wiper arms are secured before operating the vehicle to avoid damage to the windshield or arms.

Symptoms

•Streaking or smearing on the windshield
•Noisy operation during use
•Wiper blades skipping across the glass
•Cracked or split rubber on the blades
•Reduced visibility during rain

Diagnostic Steps

1
Inspect the wiper blades for signs of wear or damage.
2
Check the operation of the wiper motor to ensure it is functioning correctly.
3
Test the wiper arm tension to ensure proper contact with the windshield.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Flat screwdriver

Parts Required

•New windshield wiper blades compatible with Toyota Corolla E170 (size: 26-inch for driver side, 16-inch for passenger side)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Gather all necessary tools and parts.
Ensure the vehicle is parked on a flat surface with the ignition turned off.
Lift the wiper arms away from the windshield to an upright position.

2. Remove Old Wiper Blades

Locate the release tab on the wiper blade where it connects to the wiper arm.
Press the release tab and slide the wiper blade downwards to detach it from the wiper arm.
Repeat the process for the other wiper blade.

3. Install New Wiper Blades

Align the new wiper blade with the wiper arm.
Slide the new wiper blade into place until you hear a click indicating it is securely attached.
Gently lower the wiper arms back onto the windshield.
Repeat for the other wiper blade.

4. Test Wiper Functionality

Turn on the ignition and test the wipers to ensure they operate smoothly.
Check for proper contact with the windshield and effectiveness in wiping.