how to fix the door ajar sensor issue in my Toyota Corolla E170 (2013-2019)?

Toyota Corolla E170 (2013-2019)

Error Codes

1-2 hours

Time

medium

Difficulty

medium

Severity

3 min read

484 words

Problem Statement

Learn how to diagnose and fix the door ajar sensor issue in your 2013-2019 Toyota Corolla E170. Step-by-step guide with symptoms and solutions.

Affected Component

Electrical

Estimated Time

1-2 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical components to avoid shocks and shorts.

Symptoms

•Door ajar warning light stays illuminated on the dashboard
•Interior lights remain on when the vehicle is off
•Chime sounds intermittently when driving
•Difficulty locking doors remotely or manually
•Possible battery drain due to lights remaining on

Diagnostic Steps

1
Inspect each door and its latch for proper alignment and function.
2
Use an OBD-II scanner to check for any related error codes.
3
Examine the door ajar switch for damage or wear.
4
Test the continuity of the door ajar switch wiring with a multimeter.
5
Check the body control module for any faults or programming issues.
6
Verify the battery voltage and condition, as a weak battery can cause erratic electrical behavior.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Multimeter
•Socket set
•Screwdriver
•Electrical cleaner

Parts Required

•Door ajar switch

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect each door and its latch for proper alignment and function.
2
Use an OBD-II scanner to check for any related error codes.
3
Examine the door ajar switch for damage or wear.
4
Test the continuity of the door ajar switch wiring with a multimeter.
5
Check the body control module for any faults or programming issues.
6
Verify the battery voltage and condition, as a weak battery can cause erratic electrical behavior.

Solution

1. Preparation

Gather tools: OBD-II scanner, multimeter, socket set, screwdriver, electrical cleaner, and a replacement door ajar switch if needed.
Disconnect the vehicle battery to prevent electrical shorts and ensure safety.

2. Inspect Door Latches

Open each door and visually inspect the latch for alignment issues.
Operate the door latch manually to ensure it engages and releases smoothly.
Clean any dirt or debris from the latch mechanism using electrical cleaner.

3. Test and Replace Door Ajar Switch

Locate the door ajar switch on each door (usually integrated into the door latch).
Disconnect the wiring harness from the switch.
Using a multimeter, check for continuity across the switch terminals when the door is closed. Replace the switch if it fails the continuity test.
If replacing, install the new switch by reversing the removal steps and reconnect the wiring harness.

4. Reassemble and Test

Reconnect the vehicle battery.
Close all doors and check the operation of the door ajar sensor by observing the dashboard warning light.
Ensure that interior lights turn off and no chime sounds when the doors are closed.