FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
my Toyota Corolla E140 (2006-2013) rearview camera not working what should I do - Toyota Corolla
Home/Cars/Toyota/Corolla/E140 (2006-2013)/my Toyota Corolla E140 (2006-2013) rearview camera not working what should I do

my Toyota Corolla E140 (2006-2013) rearview camera not working what should I do

Toyota Corolla E140 (2006-2013)

Error Codes
1-3 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
495 words

Problem Statement

Learn how to diagnose and fix rearview camera issues in Toyota Corolla E140 (2006-2013). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component
Electrical
Estimated Time
1-3 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on electrical systems to prevent shock or shorts.

Symptoms

  • •Rearview camera display shows a black screen
  • •Camera image is distorted or unclear
  • •No image appears when the vehicle is in reverse
  • •Warning message on the dashboard
  • •No sound or beeping alerts when reversing

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Multimeter
  • •Screwdriver set
  • •Trim removal tool

Parts Required

  • •Replacement rearview camera (if faulty)

Additional Information

Affected Component
Electrical
Estimated Time
1-3 hours
Difficulty
medium
Severity
medium
Tools Required
4 items
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools and parts.
  • Disconnect the vehicle's battery to avoid electrical shock.
  • Ensure the vehicle is parked on a flat surface with the ignition off.
2. Inspect and Clean Camera
  • Step 1: Remove any dirt or debris from the camera lens using a soft cloth.
  • Step 2: Check the mounting of the camera for any misalignment.
3. Check Wiring and Connections
  • Step 1: Remove the trim panel in the trunk area to access the rearview camera wiring.
  • Step 2: Inspect the wiring harness for frays or breaks.
  • Step 3: Ensure the connectors are securely attached and free from corrosion.
4. Testing the Camera
  • Step 1: Reconnect the battery and turn on the ignition.
  • Step 2: Shift the vehicle into reverse and check if the camera activates.
  • Step 3: If it does not work, use a multimeter to check voltage at the camera connector. Refer to the vehicle’s wiring diagram for proper pin configuration.
5. Replace Camera (if necessary)
  • Step 1: If the camera is faulty, remove it by unscrewing it from its mount.
  • Step 2: Disconnect the wiring harness from the camera.
  • Step 3: Install the new camera by reversing the removal steps, ensuring all connections are secure.