FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to tell if the fuel pump is bad in my Toyota Corolla E140 (2006-2013)? - Toyota Corolla
Home/Cars/Toyota/Corolla/E140 (2006-2013)/how to tell if the fuel pump is bad in my Toyota Corolla E140 (2006-2013)?

how to tell if the fuel pump is bad in my Toyota Corolla E140 (2006-2013)?

Toyota Corolla E140 (2006-2013)

Error Codes
2-4 hours
Time
medium
Difficulty
high
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
4 min read
633 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix fuel pump issues in your 2006-2013 Toyota Corolla E140. Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component
Fuel System
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on electrical systems.
  • •Allow the fuel system to depressurize before disconnecting fuel lines.
  • •Work in a well-ventilated area to avoid inhaling fuel vapors.

Symptoms

  • •Check engine light illuminated
  • •Engine cranks but does not start
  • •Loss of power during acceleration
  • •Unusual whining noise from the fuel tank
  • •Poor fuel economy
  • •Presence of fuel leaks near the fuel pump area

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Fuel pressure gauge
  • •Multimeter
  • •Socket set
  • •Safety goggles

Parts Required

  • •Fuel pump (if replacement is necessary)
  • •Fuel filter (if not recently replaced)

Additional Information

Affected Component
Fuel System
Estimated Time
2-4 hours
Difficulty
medium
Severity
high
Tools Required
5 items
Parts Required
2 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather tools and materials: OBD-II scanner, fuel pressure gauge, multimeter, socket set, and safety goggles.
  • Ensure the vehicle is parked on a level surface and the engine is off. Disconnect the negative battery terminal to prevent electrical shock.
2. Check Fuel Pump Fuse and Relay
  • Locate the fuse box and identify the fuel pump fuse and relay.
  • Use a multimeter to test the fuel pump fuse for continuity. Replace if blown.
  • Test the relay by swapping it with a similar relay in the fuse box. If the fuel pump activates, replace the faulty relay.
3. Inspect Fuel Lines
  • Visually inspect the fuel lines for any cracks, leaks, or damage.
  • Tighten any loose connections or replace damaged hoses as necessary.
4. Measure Fuel Pressure
  • Connect the fuel pressure gauge to the fuel rail service port.
  • Turn the ignition to the 'ON' position and observe the pressure reading.
  • Compare with the manufacturer’s specifications (typically around 40-50 psi for most vehicles). If pressure is low, further diagnosis of the fuel pump is warranted.
5. Test Fuel Pump Operation
  • With the ignition in the 'ON' position, listen for the fuel pump's humming sound from the fuel tank. This indicates the pump is attempting to operate.
  • If no sound is heard, check the voltage at the fuel pump connector with a multimeter. If there is no voltage, check wiring and connections.
6. Replace Fuel Pump (if necessary)
  • If the pump is confirmed faulty, drain the fuel tank and disconnect the fuel lines.
  • Remove the fuel pump assembly from the tank (may require removing the tank from the vehicle).
  • Install the new fuel pump by reversing the removal process and ensure all connections are tight and secure.