how to reset the tire pressure monitoring system on my Toyota Corolla E140 (2006-2013)

Toyota Corolla E140 (2006-2013)

Error Codes

15-30 minutes

Time

easy

Difficulty

medium

Severity

3 min read

413 words

Problem Statement

Learn how to reset the Tire Pressure Monitoring System (TPMS) on your 2006-2013 Toyota Corolla E140. Step-by-step guide for accurate tire pressure readings.

Affected Component

Electrical

Estimated Time

15-30 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is parked on a flat surface before performing the reset.
•Always check tire pressures when tires are cold for accurate readings.

Symptoms

•TPMS warning light illuminated on the dashboard
•Inaccurate tire pressure readings
•Warning message displayed on the Multi-Information Display (MID)

Diagnostic Steps

1
Ensure all tires are inflated to the recommended pressure as specified on the driver's door jamb.
2
Turn the ignition key to the 'ON' position without starting the engine.
3
Locate the TPMS reset button, usually found beneath the steering column or near the driver's side dashboard.
4
Press and hold the TPMS reset button until the TPMS warning light blinks three times, then release the button.
5
Start the engine and allow the vehicle to run for a few minutes to confirm if the TPMS warning light turns off.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Tire pressure gauge

Parts Required

•None required for reset, but consider TPMS sensors if faulty.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure all tires are inflated to the recommended pressure as specified on the driver's door jamb.
2
Turn the ignition key to the 'ON' position without starting the engine.
3
Locate the TPMS reset button, usually found beneath the steering column or near the driver's side dashboard.
4
Press and hold the TPMS reset button until the TPMS warning light blinks three times, then release the button.
5
Start the engine and allow the vehicle to run for a few minutes to confirm if the TPMS warning light turns off.

Solution

1. Preparation

Gather necessary tools: tire pressure gauge.
Ensure all tires are at the recommended pressure.
Park the vehicle on a level surface and turn off the engine.

2. Resetting TPMS

Turn On Ignition
- Insert the key and turn it to the “ON” position without starting the engine.
Press TPMS Reset Button
- Find the TPMS reset button, typically located beneath the steering column.
- Press and hold the reset button until the TPMS warning light blinks three times, then release it.
Start the Engine
- Start the engine and let it run for a few minutes to allow the TPMS to recalibrate.
Verify Reset
- After a few minutes of running, check if the TPMS warning light has turned off.