why is my Toyota Camry XV70 (2018-2024) shaking while braking

Toyota Camry XV80 (2025-Present)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

535 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix shaking while braking in Toyota Camry XV70 (2018-2024). Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Brakes

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always disconnect the battery before working on any electrical components.
•Allow the brake system to cool before inspection or repair.

Symptoms

•Steering wheel shakes when applying brakes
•Vehicle shakes or vibrates when braking from high speeds
•Uneven wear on brake pads or rotors
•Pulsating brake pedal
•Increased stopping distance

Diagnostic Steps

1
Inspect brake rotors for warping or uneven wear.
2
Check brake pads for thickness and uneven wear patterns.
3
Examine suspension components, including control arms and bushings, for wear or damage.
4
Perform a wheel balance check to ensure tires are properly balanced.
5
Inspect tire condition and alignment for any irregularities.
6
Scan for any error codes related to the braking system using an OBD-II scanner.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Jack and jack stands
•Socket set
•Torque wrench
•Brake cleaner
•Bungee cord

Parts Required

•Brake rotors (if warped)
•Brake pads (if worn)
•Suspension components (if damaged)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect brake rotors for warping or uneven wear.
2
Check brake pads for thickness and uneven wear patterns.
3
Examine suspension components, including control arms and bushings, for wear or damage.
4
Perform a wheel balance check to ensure tires are properly balanced.
5
Inspect tire condition and alignment for any irregularities.
6
Scan for any error codes related to the braking system using an OBD-II scanner.

Solution

1. Preparation

Gather necessary tools and parts.
Park the vehicle on a level surface and engage the parking brake.
Wear safety gloves and goggles.

2. Inspect and Replace Brake Rotors

Lift Vehicle: Use a jack to lift the front of the vehicle; secure it with jack stands.
Remove Wheel: Use a socket set to remove the lug nuts and take off the wheel.
Inspect Rotors: Examine the rotors for warping or scoring. Measure with a dial indicator if necessary.
Replace Rotors: If warped, remove the caliper using a socket set and hang it with a bungee cord. Remove the rotor and install a new rotor, ensuring proper alignment.
Reassemble: Reinstall the caliper and wheel, torque lug nuts to manufacturer specifications (typically around 76 ft-lbs for Camry).

3. Check and Replace Brake Pads

Inspect Brake Pads: Check the thickness of the brake pads; if below 3mm, replace them.
Remove Caliper: If replacing pads, remove the caliper as done previously.
Replace Pads: Slide out the old pads and install new ones, ensuring they fit snugly in place.
Reassemble: Reattach the caliper and wheel.

4. Inspect Suspension Components

Visual Inspection: Check control arms, bushings, and tie rods for any signs of wear or damage.
Replace Worn Parts: If any parts are damaged or worn, replace them using appropriate tools.

5. Wheel Balancing and Alignment

Balance Wheels: Take the vehicle to a tire shop for a wheel balancing check.
Perform Alignment: Ensure the alignment is within specifications to prevent uneven tire wear.