why does my Toyota Camry XV70 (2018-2024) shake when I'm braking

Toyota Camry XV80 (2025-Present)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

513 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix brake shaking in Toyota Camry XV70 (2018-2024). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Brakes

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is securely supported on jack stands before working underneath it.
•Allow brakes to cool before touching components to avoid burns.

Symptoms

•Steering wheel shakes while braking
•Vehicle body vibrates during braking
•Increased stopping distance
•Unusual noise (such as grinding or squealing) during braking
•Brake pedal pulsation

Diagnostic Steps

1
Inspect brake pads for wear and tear using visual inspection.
2
Check brake rotors for warping or uneven wear using a dial indicator.
3
Examine brake calipers for proper operation and ensure they are not sticking.
4
Inspect suspension components (e.g., control arms, bushings) for damage or wear.
5
Check tire pressure and look for uneven tire wear patterns.
6
Perform a visual inspection of wheel bearings for play or damage.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Jack and jack stands
•Lug wrench
•Torque wrench
•Dial indicator (for rotor inspection)
•Bungee cord

Parts Required

•Brake pads
•Brake rotors (if needed)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect brake pads for wear and tear using visual inspection.
2
Check brake rotors for warping or uneven wear using a dial indicator.
3
Examine brake calipers for proper operation and ensure they are not sticking.
4
Inspect suspension components (e.g., control arms, bushings) for damage or wear.
5
Check tire pressure and look for uneven tire wear patterns.
6
Perform a visual inspection of wheel bearings for play or damage.

Solution

1. Preparation

Gather tools and parts required for the repair.
Ensure the vehicle is on a flat surface and set the parking brake.
Use wheel chocks to secure the vehicle.

2. Remove Wheel

Loosen the lug nuts on the affected wheel.
Lift the vehicle using a jack and secure it with jack stands.
Remove the lug nuts and take off the wheel.

3. Inspect and Replace Brake Pads

Remove the caliper by unscrewing the caliper bolts.
Slide the caliper off the rotor and support it with a bungee cord to avoid stress on the brake line.
Remove the old brake pads from the caliper bracket.
Compare new pads with old ones to ensure proper fit.
Insert new brake pads into the caliper bracket.

4. Inspect and Resurface or Replace Rotors

Remove the rotor by unscrewing the rotor retaining screws if applicable.
Check the rotor for thickness and warping using a dial indicator. If warped, resurface or replace the rotor.
If replacing, install the new rotor and torque to manufacturer's specifications.

5. Reassemble Components

Reinstall the caliper over the new brake pads.
Torque caliper bolts to the manufacturer's specifications.
Reinstall the wheel and hand-tighten the lug nuts.
Lower the vehicle and torque the lug nuts to the manufacturer's specifications.