my Toyota Camry XV50 (2012-2017) shakes when I brake what's wrong

Toyota Camry XV80 (2025-Present)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

510 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix brake shaking in Toyota Camry XV50 (2012-2017). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Brakes

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always disconnect the battery before working on electrical components.
•Allow the vehicle to cool down before touching any brake components.

Symptoms

•Steering wheel shakes during braking
•Vibration felt in the brake pedal
•Uneven wear on brake pads or rotors
•Possible noise when braking (squeaking or grinding)
•Vehicle pulls to one side while braking

Diagnostic Steps

1
Inspect brake rotors for warping or uneven wear.
2
Check brake pads for thickness and even wear.
3
Examine suspension components for wear (e.g., control arms, bushings).
4
Inspect wheel bearings for play or noise.
5
Verify alignment and balance of the wheels.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Jack
•Jack stands
•Lug wrench
•Torque wrench
•Rotor puller (if necessary)
•Brake pad spreader tool

Parts Required

•New brake rotors
•New brake pads

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Gather necessary tools and parts.
Ensure the vehicle is parked on a level surface and engage the parking brake.
Place wheel chocks behind the rear wheels for safety.

2. Remove Wheel

Tools Required: Jack, jack stands, lug wrench.
Sub-steps:
1. Loosen lug nuts slightly while the wheel is on the ground.
2. Lift the vehicle with a jack and secure it on jack stands.
3. Remove the lug nuts completely and take off the wheel.

3. Inspect and Replace Brake Rotors

Tools Required: Rotor puller (if necessary), torque wrench.
Sub-steps:
1. Check the brake rotors for warping using a dial indicator.
2. If warped, remove the caliper bolts and slide the caliper off the rotor.
3. Remove the rotor from the hub; if stuck, use a rotor puller.
4. Install new rotors, ensuring they are properly seated.
5. Reattach the caliper, tightening bolts to manufacturer specifications.

4. Replace Brake Pads

Tools Required: Brake pad spreader tool, torque wrench.
Sub-steps:
1. Remove the old brake pads from the caliper bracket.
2. Use a brake pad spreader tool to compress the caliper piston back into the caliper.
3. Install new brake pads into the caliper bracket.
4. Ensure all components are fitted properly and securely.

5. Reassemble and Test

Tools Required: Torque wrench.
Sub-steps:
1. Reattach the wheel and hand-tighten the lug nuts.
2. Lower the vehicle and then torque the lug nuts to the manufacturer's specifications.
3. Test the brakes at low speed to ensure proper operation.