FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to reset the maintenance light on my Toyota Camry XV70 (2018-2024)? - Toyota Camry
Home/Cars/Toyota/Camry/XV80 (2025-Present)/how to reset the maintenance light on my Toyota Camry XV70 (2018-2024)?

how to reset the maintenance light on my Toyota Camry XV70 (2018-2024)?

Toyota Camry XV80 (2025-Present)

Error Codes
5-10 minutes
Time
easy
Difficulty
low
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
2 min read
379 words

Problem Statement

Learn how to reset the maintenance light on your Toyota Camry XV70 (2018-2024) with this step-by-step guide. Quick and easy instructions included.

Affected Component
Electrical
Estimated Time
5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure vehicle is in the park position and on a flat surface to prevent rolling.

Symptoms

  • •Maintenance light illuminated on the dashboard
  • •Reminder for oil change or service displayed
  • •No other performance issues affecting the vehicle

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •None specifically required for this process.

Parts Required

  • •None required.

Additional Information

Affected Component
Electrical
Estimated Time
5-10 minutes
Difficulty
easy
Severity
low
Tools Required
1 item
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Ensure the vehicle is parked in a safe location.
  • Gather any necessary tools (if applicable).
2. Resetting the Maintenance Light

  1. Power Off the Vehicle

    • Ensure the engine is completely off and the key is removed from the ignition.

  2. Access the Odometer Reset Button

    • Locate the odometer reset button on the instrument cluster.

  3. Press and Hold the Odometer Reset Button

    • Press and hold the odometer reset button while keeping it pressed.

  4. Turn the Ignition ON

    • Turn the ignition key to the ON position (do not start the engine) while still holding the odometer reset button.

  5. Wait for the Maintenance Light to Blink

    • Continue holding the button until the maintenance light blinks and then turns off, which usually takes a few seconds.

  6. Release the Odometer Reset Button

    • Once the light is off, release the odometer reset button.

  7. Turn Off the Ignition

    • Turn the ignition OFF and then back ON to verify that the maintenance light is no longer illuminated.