how to fix my Toyota Camry XV70 (2018-2024) that is shaking when braking

Toyota Camry XV80 (2025-Present)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

509 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix shaking brakes in Toyota Camry XV70 (2018-2024). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Brakes

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is on a flat surface
•Engage the parking brake
•Wear safety glasses
•Disconnect the battery before working on electrical components
•Allow the brake components to cool before touching them

Symptoms

•Steering wheel shakes during braking
•Pulsation felt through the brake pedal
•Uneven wear on brake pads or rotors
•Noise coming from the brakes (squealing or grinding)
•Vehicle pulls to one side while braking

Diagnostic Steps

1
Inspect brake components for wear or damage
2
Check rotor condition by measuring thickness and checking for warping
3
Inspect tires for uneven wear, proper inflation, and balance
4
Examine suspension components for play or damage
5
Scan for error codes using an OBD-II scanner

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Jack and jack stands
•Lug wrench
•Brake cleaner
•Torque wrench
•Micrometer
•Dial indicator

Parts Required

•Brake pads
•Brake rotors

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Tools Required: Jack and jack stands, lug wrench, brake cleaner, torque wrench, micrometer, dial indicator.
Safety Warnings: Ensure the vehicle is on a flat surface, engage the parking brake, and wear safety glasses.

2. Remove Wheel

Loosen the lug nuts on the wheel before lifting the vehicle.
Use a jack to raise the vehicle and secure it with jack stands.
Remove the lug nuts completely and take off the wheel.

3. Inspect and Replace Brake Components

Brake Pads:
- Remove the caliper bolts and gently slide the caliper off the rotor.
- Remove old brake pads and inspect for even wear; replace if necessary.
- Install new pads ensuring they are properly seated.
Brake Rotors:
- If rotors are warped or below minimum thickness, remove them.
- Install new rotors after cleaning the hub surface with brake cleaner.
- Torque rotor retaining screws to manufacturer specifications.

4. Reassemble Components

Carefully slide the caliper back over the new pads.
Reinstall caliper bolts and torque them to the manufacturer's specifications.
Reinstall the wheel and torque the lug nuts in a star pattern to the recommended torque.

5. Final Inspection

Lower the vehicle and check the wheel for proper rotation.
Perform a visual inspection of the brake system after reassembly.