FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
Why does my Toyota Camry XV70 make a clunking sound when going over bumps? - Toyota Camry
Home/Cars/Toyota/Camry/XV70 (2018-2024)/Why does my Toyota Camry XV70 make a clunking sound when going over bumps?

Why does my Toyota Camry XV70 make a clunking sound when going over bumps?

Toyota Camry XV70 (2018-2024)

Error Codes
2-4 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
4 min read
673 words

Problem Statement

Learn how to diagnose and repair clunking sounds in your Toyota Camry XV70's suspension system with our detailed guide.

Affected Component
suspension
Estimated Time
2-4 hours

Symptoms

  • •A noticeable clunking or knocking sound from the front or rear of the vehicle when driving over bumps or uneven surfaces.
  • •The sound may be more pronounced when the vehicle is loaded with passengers or cargo.
  • •Potential rattling noises may accompany the clunking sound.
  • •No warning lights illuminated on the dashboard.

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
  7. 7
  8. 8
  9. 9
  10. 10

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Floor jack
  • •Jack stands
  • •Socket set (metric)
  • •Wrench set
  • •Torque wrench
  • •Pry bar
  • •Bungee cords or zip ties (for temporary holding)
  • •Rubber mallet or hammer
  • •Flashlight
  • •Mechanic's creeper (optional)
  • •Suspension inspection tools (if necessary)

Additional Information

Affected Component
suspension
Estimated Time
2-4 hours
Difficulty
medium
Severity
medium
Tools Required
11 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Problem: Clunking Sound Over Bumps in Toyota Camry XV70
Possible Causes
  • Worn or damaged suspension components (e.g., struts, shocks, bushings).
  • Loose or damaged exhaust system components.
  • Loose heat shields or other undercarriage components.
  • Issues with the sway bar or its links.
Tools Required
  • Floor jack
  • Jack stands
  • Socket set (metric)
  • Wrench set
  • Torque wrench
  • Pry bar
  • Bungee cords or zip ties (for temporary holding)
  • Rubber mallet or hammer
  • Flashlight
  • Mechanic's creeper (optional)
  • Suspension inspection tools (if necessary)
Repair Instructions

Step 1: Replace Worn Suspension Components

  1. Identify the Damaged Part:

    • Based on your inspection and tests, determine which component (struts, shocks, bushings, sway bar links) needs replacing.

  2. Remove the Damaged Component:

    • For struts or shocks:
      • Use the socket set to remove the bolts securing the strut/shock to the lower control arm and upper mount.
      • Carefully lower the suspension to remove the strut or shock.
    • For sway bar links:
      • Remove the bolts securing the sway bar link to the sway bar and the control arm.

  3. Install New Component:

    • Install the new strut or shock by reversing the removal process. Ensure the mount bolts are torqued to the manufacturer's specifications (consult the repair manual for torque values).
    • For sway bar links, ensure they are securely fastened.

Step 2: Inspect and Replace Bushings (if necessary)

  1. Remove the Control Arm (if applicable):

    • If bushings are worn, you may need to remove the control arm for replacement.
    • Use a socket set to remove the control arm bolts.

  2. Replace Bushings:

    • Press out the old bushings using a bushing removal tool or a press.
    • Install the new bushings, ensuring they are seated correctly.

  3. Reinstall Control Arm:

    • Reinstall the control arm and torque all bolts to specifications.

Step 3: Reassemble and Test Drive

  1. Reassemble:

    • Recheck all components for secure installation.
    • Lower the vehicle back to the ground.

  2. Conduct a Test Drive:

    • Take the vehicle for a test drive over bumps to confirm that the clunking sound has been resolved.
    • Listen carefully for any remaining noises and check for any abnormal handling characteristics.
Conclusion

If the clunking sound persists after replacing worn components, further diagnosis may be necessary, including a more detailed inspection of the entire suspension system or consulting a professional mechanic.