Why does my 2020 Toyota Camry XV70 have a faulty throttle response?

Toyota Camry XV70 (2018-2024)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

Error Code: P0120, P0121, P2135, P2118

3 min read

563 words

Problem Statement

Learn about the symptoms, diagnostic steps, and repair instructions for addressing faulty throttle response in the 2020 Toyota Camry XV70.

Error Code

P0120, P0121, P2135, P2118

Affected Component

Throttle Control System

Estimated Time

2-4 hours

Symptoms

•Delayed Acceleration
•Stuttering or Hesitation
•Check Engine Light
•Inconsistent Power Delivery
•Unresponsive Throttle

Diagnostic Steps

1
Visual Inspection
2
Scan for Error Codes
3
Throttle Position Sensor (TPS) Testing
4
Accelerator Pedal Position Sensor (APPS) Testing
5
Throttle Body Actuator Check
6
Electrical System Check

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II Scanner
•Multimeter
•Basic hand tools (screwdrivers, socket set)
•Throttle body cleaner
•Torque wrench (if necessary for reassembly)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

Faulty Throttle Response in 2020 Toyota Camry XV70

Tools Required

OBD-II Scanner
Multimeter
Basic hand tools (screwdrivers, socket set)
Throttle body cleaner
Torque wrench (if necessary for reassembly)

Repair Instructions

Cleaning the Throttle Body:
- Disconnect the negative battery terminal.
- Remove the air intake duct connected to the throttle body.
- Carefully remove the throttle body from the intake manifold (note any gaskets or seals).
- Clean the throttle body with throttle body cleaner and a soft cloth or brush.
- Reattach the throttle body, ensuring all gaskets are properly seated.
Replace Throttle Position Sensor (if faulty):
- If TPS testing showed irregular readings, remove the old sensor.
- Install the new TPS, ensuring it is aligned properly.
- Reconnect the electrical connector and test the voltage output again.
Replace Accelerator Pedal Position Sensor (if faulty):
- If APPS testing showed irregular readings, remove the old sensor.
- Install the new APPS and ensure proper alignment.
- Reconnect the electrical connector and retest.
Recheck Electrical Connections:
- Ensure all connectors are secure and free from corrosion.
- Repair or replace any damaged wiring as needed.
Reset the ECU:
- Reconnect the negative battery terminal.
- Use the OBD-II scanner to clear any trouble codes.
- Start the engine and test throttle response.
Test Drive:
- Take the vehicle for a test drive to confirm that throttle response is normal.
- Monitor for any reoccurrence of symptoms or check engine light.

Conclusion

If the throttle response remains faulty after these steps, further diagnosis may involve deeper inspection of the ECU or the wiring harness. It may be prudent to consult a professional technician if the issue persists.