What does it mean if my Toyota Camry XV70 is shaking during braking?

Toyota Camry XV70 (2018-2024)

Error Codes

2-3 hours

Time

medium

Difficulty

medium

Severity

4 min read

630 words

Problem Statement

Learn about the causes of shaking during braking in your Toyota Camry XV70, including symptoms, diagnostic steps, and repair instructions.

Affected Component

brake system

Estimated Time

2-3 hours

Symptoms

•Vibration or shaking felt through the steering wheel or brake pedal when braking
•Shaking may increase with speed
•Pronounced shaking during hard braking
•Noise (squeaking or grinding)
•Pulling to one side
•Reduced braking efficiency

Diagnostic Steps

1
Visual Inspection: Check brake pads for wear, inspect rotors for grooves or warping, look for signs of uneven tire wear or damage, examine suspension components for any visible damage
2
Wheel and Tire Check: Inspect tire pressure and ensure all tires are inflated to the manufacturer’s specifications, check for any signs of bulging, uneven wear, or damage
3
Brake System Check: Remove the wheel and check the condition of the brake pads and rotors, measure rotor thickness and check for warping using a dial indicator
4
Test Drive: Drive the vehicle in a safe area and perform multiple braking tests from different speeds to determine when the shaking occurs

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Jack and jack stands
•Lug wrench
•Torque wrench
•Dial indicator with magnetic base
•Brake pad gauge
•Tire pressure gauge

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Visual Inspection: Check brake pads for wear, inspect rotors for grooves or warping, look for signs of uneven tire wear or damage, examine suspension components for any visible damage
2
Wheel and Tire Check: Inspect tire pressure and ensure all tires are inflated to the manufacturer’s specifications, check for any signs of bulging, uneven wear, or damage
3
Brake System Check: Remove the wheel and check the condition of the brake pads and rotors, measure rotor thickness and check for warping using a dial indicator
4
Test Drive: Drive the vehicle in a safe area and perform multiple braking tests from different speeds to determine when the shaking occurs

Solution

Issue: Shaking During Braking in Toyota Camry XV70

Possible Causes

Warped Brake Rotors: The most common cause of shaking during braking is warped or unevenly worn brake rotors.
Worn Brake Pads: Brake pads that are worn unevenly can create a pulsating feeling when braking.
Wheel Alignment Issues: Misalignment can cause shaking, especially if it occurs during braking.
Suspension Issues: Worn suspension components can cause instability and shaking when braking.
Tire Issues: Unbalanced or damaged tires may also contribute to vibrations during braking.

Tools Required

Jack and jack stands
Lug wrench
Torque wrench
Dial indicator with magnetic base
Brake pad gauge
Tire pressure gauge

Repair Instructions

Step 1: Lift the Vehicle

Park the vehicle on a level surface, engage the parking brake, and place wheel chocks behind the rear wheels.
Use a jack to lift the front of the vehicle and secure it with jack stands.

Step 2: Remove the Front Wheels

Using a lug wrench, loosen the lug nuts on the front wheels.
Remove the lug nuts and then take off the wheels.

Step 3: Inspect the Brake Components

Brake Pads: Check the thickness of the brake pads. If they are less than 3mm thick, replace them.
Brake Rotors: Use a dial indicator to check rotor runout. If the runout exceeds 0.002 inches, the rotor should be resurfaced or replaced.

Step 4: Replace or Resurface Rotors

If the rotors are warped, you have two options:
- Resurface: If they’re within thickness specifications and not excessively warped, use a brake lathe to resurface them.
- Replace: If they are too thin or damaged, replace them with new rotors.

Step 5: Replace Brake Pads

Remove the caliper using a socket and ratchet.
Slide the caliper off the rotor and support it without straining the brake line.
Remove the old brake pads and install new ones, ensuring they fit snugly in the caliper bracket.

Step 6: Reassemble and Torque

Reinstall the caliper over the new pads and rotor.
Reattach the wheel and hand-tighten the lug nuts.
Lower the vehicle and torque the lug nuts to the manufacturer’s specifications (typically around 76 lb-ft for the Camry).

Step 7: Test Drive

Once everything is reassembled, take the vehicle for a test drive.
Perform several brake tests to ensure that the shaking has been resolved.

Conclusion

If the shaking persists after performing these checks and repairs, consider having the vehicle examined by a professional technician, as additional issues related to suspension or alignment may be present.