what does it mean if my Toyota Camry XV70 (2018-2024) shakes when braking

Toyota Camry XV70 (2018-2024)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

487 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix brake shaking in Toyota Camry XV70 (2018-2024). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Brakes

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical components.
•Ensure the vehicle is securely lifted and supported on jack stands before working underneath.

Symptoms

•Vibration felt in the steering wheel while braking
•Pulsation in the brake pedal
•Uneven wear on brake pads or rotors
•Potential noise such as grinding or squeaking during braking
•Vehicle pulling to one side when braking

Diagnostic Steps

1
Inspect brake pads for wear and thickness using a caliper gauge.
2
Check brake rotors for warpage using a runout gauge.
3
Examine suspension components such as control arms and bushings for wear.
4
Test wheel alignment and balance to ensure proper handling.
5
Scan for any brake system error codes using an OBD-II scanner.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Lug wrench
•Jack
•Jack stands
•Brake caliper tool
•Torque wrench
•Runout gauge

Parts Required

•Brake pads
•Brake rotors

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect brake pads for wear and thickness using a caliper gauge.
2
Check brake rotors for warpage using a runout gauge.
3
Examine suspension components such as control arms and bushings for wear.
4
Test wheel alignment and balance to ensure proper handling.
5
Scan for any brake system error codes using an OBD-II scanner.

Solution

1. Preparation

Gather necessary tools and parts.
Ensure the vehicle is parked on a level surface and secured with wheel chocks.
Disconnect the battery to prevent accidental electrical issues.

2. Remove Wheel and Brake Assembly

Tools Required: Lug wrench, jack, jack stands
- Use a lug wrench to loosen the lug nuts.
- Lift the vehicle using a jack and secure it on jack stands.
- Remove the lug nuts and take off the wheel.

3. Inspect and Replace Brake Components

Tools Required: Brake caliper tool, torque wrench
- Remove the caliper bolts and detach the brake caliper from the rotor.
- If pads are worn beyond specifications (usually below 3mm), replace them with new pads.
- Remove the rotor by unscrewing any retaining screws and pulling it off the hub.

4. Resurface or Replace Rotors

If rotors are warped (check with runout gauge), either:
- Resurface: Use a brake lathe to machine the rotors evenly.
- Replace: If rotors are beyond specifications, install new rotors ensuring they are properly torqued to manufacturer's specifications (typically around 80-100 lb-ft).

5. Reassemble Brake System

Reinstall the rotor and caliper, ensuring all bolts are torqued to specifications.
Reattach the wheel and lug nuts, tightening them in a crisscross pattern.
Lower the vehicle and reconnect the battery.