FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
What are the signs of a failing ignition coil in a 2020 Toyota Camry XV70? - Toyota Camry
Home/Cars/Toyota/Camry/XV70 (2018-2024)/What are the signs of a failing ignition coil in a 2020 Toyota Camry XV70?

What are the signs of a failing ignition coil in a 2020 Toyota Camry XV70?

Toyota Camry XV70 (2018-2024)

Error Codes
2 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
4 min read
800 words

Problem Statement

Learn about the signs of a failing ignition coil in a 2020 Toyota Camry XV70, including symptoms, diagnostic steps, and repair instructions.

Affected Component
ignition coil
Estimated Time
2 hours

Symptoms

  • •Engine Misfires
  • •Reduced Engine Power
  • •Poor Fuel Economy
  • •Check Engine Light (CEL)
  • •Hard Starts or No Starts
  • •Rough Idle
  • •Visual Inspection

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Multimeter
  • •Spark plug socket and ratchet
  • •Torque wrench
  • •Digital camera
  • •Safety glasses
  • •Gloves

Additional Information

Affected Component
ignition coil
Estimated Time
2 hours
Difficulty
medium
Severity
medium
Tools Required
7 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Signs of a Failing Ignition Coil in a 2020 Toyota Camry XV70

The ignition coil is a crucial component of your vehicle's ignition system, responsible for converting the battery's low voltage to the high voltage needed to create a spark in the spark plugs. A failing ignition coil can lead to several symptoms that affect the car's performance. Below are the common signs to look out for:

1. Engine Misfires

  • Symptoms: You may feel a noticeable shaking or jerking while accelerating. The engine may run rough at idle and you might hear popping sounds from the exhaust.
  • Diagnostic Steps: Use an OBD-II scanner to check for trouble codes, particularly P0300, P0301, P0302, etc., which indicate misfire codes.

2. Reduced Engine Power

  • Symptoms: Hesitation during acceleration, sluggish performance, and difficulty maintaining speed.
  • Diagnostic Steps: Test drive the vehicle to assess performance. Pay attention to how the engine responds under load.

3. Poor Fuel Economy

  • Symptoms: Noticeable decrease in miles per gallon (MPG) due to inefficient combustion.
  • Diagnostic Steps: Compare current fuel economy against previous records and manufacturer specifications.

4. Check Engine Light (CEL)

  • Symptoms: The check engine light may illuminate on the dashboard.
  • Diagnostic Steps: Use an OBD-II scanner to read the diagnostic trouble codes (DTCs) associated with the ignition system.

5. Hard Starts or No Starts

  • Symptoms: The engine may be difficult to start or may not start at all.
  • Diagnostic Steps: Attempt to start the vehicle multiple times. If it cranks but doesn’t start, check for spark at the spark plugs.

6. Rough Idle

  • Symptoms: The engine idles unevenly, shaking or vibrating more than usual.
  • Diagnostic Steps: Observe the RPM gauge for fluctuations and listen for irregular engine sounds.

7. Visual Inspection

  • Symptoms: Physical damage may be visible on the ignition coil.
  • Diagnostic Steps: Check for cracks, burns, or corrosion on the ignition coil and its connectors.

Tools Required

  • OBD-II scanner
  • Multimeter
  • Spark plug socket and ratchet
  • Torque wrench
  • Digital camera (for documentation)
  • Safety glasses
  • Gloves

Step-by-Step Diagnostic Procedure

  1. Use an OBD-II Scanner:

    • Connect the scanner to the vehicle’s OBD-II port (usually located under the dashboard).
    • Retrieve any trouble codes and write them down for reference.

  2. Perform a Visual Inspection:

    • Remove the engine cover (if applicable) and visually inspect the ignition coils.
    • Look for signs of damage, such as cracks or burnt spots.

  3. Test Ignition Coil Resistance:

    • Disconnect the ignition coil connector.
    • Use a multimeter to measure the primary and secondary resistance of the ignition coil.
      • Primary Resistance: Should be between 0.4 to 2.0 ohms.
      • Secondary Resistance: Should be between 6,000 to 15,000 ohms.
    • If the readings are outside of these ranges, the coil is likely faulty.

  4. Check Spark at the Spark Plug:

    • Remove a spark plug and reconnect it to the ignition coil.
    • Ground the spark plug against the engine block and crank the engine.
    • Observe for a strong blue spark. If there is no spark, the ignition coil may be defective.

  5. Inspect Spark Plugs:

    • Check the condition of the spark plugs. Excessive wear or fouling can indicate related issues.
Repair Instructions

Tools Required for Replacement

  • Replacement ignition coils (if necessary)
  • Torque wrench
  • Spark plug socket and ratchet
  • Thread locker (optional)
  • Engine oil (for spark plug threads)

Step-by-Step Replacement Procedure

  1. Preparation:

    • Ensure the engine is cool.
    • Disconnect the negative battery terminal to prevent any electrical shorts.

  2. Remove Engine Cover:

    • If applicable, remove any engine covers to access the ignition coils.

  3. Remove Ignition Coils:

    • Disconnect the electrical connector from the ignition coil.
    • Remove the bolt(s) securing the ignition coil and gently pull it out.

  4. Install New Ignition Coil:

    • Apply a small amount of engine oil to the threads of the new coil (optional).
    • Insert the new ignition coil into the spark plug well, secure it with the bolt, and reconnect the electrical connector.

  5. Reinstall Spark Plugs:

    • If spark plugs were removed, reinstall them, ensuring they are properly gapped.
    • Torque the spark plugs to the manufacturer's specifications.

  6. Reattach Engine Cover:

    • If the engine cover was removed, reinstall it.

  7. Reconnect Battery:

    • Reconnect the negative battery terminal.

  8. Test Drive:

    • Start the engine and take the vehicle for a test drive to ensure all symptoms have been resolved.

By following these detailed steps, you can effectively diagnose and replace a failing ignition coil in a 2020 Toyota Camry XV70. Always consult the vehicle’s service manual for specific torque specifications and procedures.