FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
What are the common issues with the Toyota Camry XV70's electronic throttle control? - Toyota Camry
Home/Cars/Toyota/Camry/XV70 (2018-2024)/What are the common issues with the Toyota Camry XV70's electronic throttle control?

What are the common issues with the Toyota Camry XV70's electronic throttle control?

Toyota Camry XV70 (2018-2024)

Error Codes
2-3 hours
Time
medium
Difficulty
medium
Severity
Error Code: P2111, P2112, P2135
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
4 min read
664 words

Problem Statement

Explore common issues, symptoms, and diagnostic steps for the electronic throttle control system in the Toyota Camry XV70 (2018-2024).

Error Code
P2111, P2112, P2135
Affected Component
Electronic Throttle Control
Estimated Time
2-3 hours

Symptoms

  • •Unresponsive Acceleration
  • •Erratic Idle
  • •Check Engine Light (CEL)
  • •Reduced Power Mode
  • •Stalling

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II Scanner
  • •Multimeter
  • •Torque Wrench
  • •Screwdrivers (Philips and flathead)
  • •Throttle Body Cleaner
  • •Safety Gloves
  • •Cleaning Cloths
  • •Wrench Set

Additional Information

Error Code
P2111, P2112, P2135
Affected Component
Electronic Throttle Control
Estimated Time
2-3 hours
Difficulty
medium
Severity
medium
Tools Required
8 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Common Issues with the Toyota Camry XV70's Electronic Throttle Control

The Toyota Camry XV70, produced from 2018 to 2024, utilizes an electronic throttle control (ETC) system that can experience various issues. Below are some common symptoms, diagnostic steps, tools required, and repair instructions related to the ETC system.

Tools Required
  • OBD-II Scanner
  • Multimeter
  • Torque Wrench
  • Screwdrivers (Philips and flathead)
  • Throttle Body Cleaner
  • Safety Gloves
  • Cleaning Cloths
  • Wrench Set

Repair Instructions

Step 1: Cleaning the Throttle Body

  1. Preparation:

    • Disconnect the negative battery terminal to prevent electrical shorts.

  2. Remove Air Intake Duct:

    • Use a screwdriver or wrench to detach the air intake duct connected to the throttle body.

  3. Access Throttle Body:

    • Remove any bolts or screws securing the throttle body (refer to the vehicle manual for specific locations).

  4. Clean the Throttle Body:

    • Spray throttle body cleaner onto a clean cloth or directly onto the throttle body.
    • Gently clean the inside of the throttle body, especially around the butterfly valve, to remove carbon buildup.

  5. Reassemble:

    • Reinstall the throttle body and secure it with the appropriate torque specifications.
    • Reconnect the air intake duct and ensure all connections are tight.

Step 2: Checking and Replacing the TPS (if necessary)

  1. Remove the Throttle Body (if needed):

    • If the TPS requires replacement, you may need to remove the throttle body entirely.

  2. Disconnect the TPS Connector:

    • Carefully disconnect the electrical connector from the TPS.

  3. Remove the TPS:

    • Unscrew the TPS from the throttle body.

  4. Install New TPS:

    • Position the new TPS and secure it with screws. Ensure it is aligned correctly.

  5. Reconnect the Connector:

    • Reattach the electrical connector to the new TPS.

Step 3: Reconnect Battery and Test Drive

  1. Reconnect the Battery:

    • Reattach the negative battery terminal and ensure it is tight.

  2. Start the Engine:

    • Start the vehicle and allow it to idle for a few minutes. Check for any warning lights on the dashboard.

  3. Test Drive:

    • Take the vehicle for a test drive to ensure that the throttle response is normal and no error codes are triggered.

Conclusion

If issues persist after cleaning the throttle body and replacing the TPS, further diagnostics may be needed, potentially involving the ETC control module or wiring harness. Always refer to the manufacturer's service manual for specific repair procedures and specifications. If the problem remains unresolved, it may be advisable to seek assistance from a qualified automotive technician.