how to reset the tire pressure monitoring system in my Toyota Camry XV50 (2012-2017)?

Toyota Camry XV70 (2018-2024)

15-30 minutes

Time

easy

Difficulty

medium

Severity

3 min read

408 words

Problem Statement

Learn how to reset the TPMS in your Toyota Camry XV50 (2012-2017). Step-by-step instructions to resolve tire pressure monitoring issues effectively.

Affected Component

Electrical

Estimated Time

15-30 minutes

Important safety information - read before proceeding

1
Check the tire pressures using a tire pressure gauge to ensure all tires are inflated to the manufacturer's recommended PSI.
2
Verify that the spare tire (if equipped with a TPMS sensor) is also properly inflated.
3
Confirm that the TPMS warning light is still on after ensuring proper tire pressures.

After completing the repair, verify that the issue has been resolved:

To prevent this issue from occurring again:

No comments yet

Be the first to share your thoughts

Solution

1. Preparation

Ensure all tires are properly inflated to the recommended pressure specified on the driver's door jamb label.
Gather necessary tools: tire pressure gauge and vehicle key.

2. Resetting the TPMS

Turn the Ignition On: Insert the key into the ignition and turn it to the "ON" position without starting the engine.
Locate the TPMS Reset Button: This is typically found under the dashboard, near the steering column or on the lower left side of the dash.
Press and Hold the Reset Button: Press and hold the TPMS reset button until the TPMS warning light blinks three times, then release the button.
Turn Off the Ignition: Turn the ignition back to the "OFF" position.
Start the Engine: Turn the ignition to the "ON" position again and start the engine. The TPMS warning light should be off after a few seconds if the reset was successful.

3. Final Checks

If the warning light remains illuminated, recheck tire pressures and repeat the reset procedure.