FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to reset the tire pressure light on Toyota Camry XV50 (2012-2017) - Toyota Camry
Home/Cars/Toyota/Camry/XV70 (2018-2024)/how to reset the tire pressure light on Toyota Camry XV50 (2012-2017)

how to reset the tire pressure light on Toyota Camry XV50 (2012-2017)

Toyota Camry XV70 (2018-2024)

Error Codes
15-30 minutes
Time
easy
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
2 min read
373 words

Problem Statement

Learn how to reset the tire pressure light on Toyota Camry XV50 (2012-2017). Step-by-step guide to ensure proper tire pressure monitoring.

Affected Component
Electrical
Estimated Time
15-30 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure vehicle is parked on a level surface before checking tire pressures.

Symptoms

  • •Tire pressure warning light is illuminated on the dashboard.
  • •Possible uneven tire pressure across all tires.
  • •No other warning lights present.

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •None required for the reset.

Parts Required

  • •None required for the reset.

Additional Information

Affected Component
Electrical
Estimated Time
15-30 minutes
Difficulty
easy
Severity
medium
Tools Required
1 item
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Ensure all tires are properly inflated to the recommended PSI (found on the driver’s side door jamb).
  • Gather necessary tools: none required for this reset.
2. Resetting the TPMS

  1. Locate the TPMS Reset Button:

    • The TPMS reset button is typically located under the steering wheel or near the driver’s side dashboard.

  2. Perform the Reset:

    • With the ignition in the "ON" position (engine off), press and hold the TPMS reset button until the tire pressure light blinks three times and then turns off.
    • Release the button.

  3. Start the Engine:

    • Start the vehicle and allow it to run for a few minutes. The tire pressure light should remain off if the reset was successful.

  4. Test Drive the Vehicle:

    • Drive the vehicle at speeds above 25 mph for approximately 10 minutes. This allows the TPMS to recalibrate.