how to reset the maintenance light on Toyota Camry XV70 (2018-2024)

Toyota Camry XV70 (2018-2024)

5-10 minutes

Time

easy

Difficulty

low

Severity

3 min read

412 words

Problem Statement

Learn how to reset the maintenance light on Toyota Camry XV70 (2018-2024) with this step-by-step guide. Quick and easy process to clear reminders.

Affected Component

Electrical

Estimated Time

5-10 minutes

Important safety information - read before proceeding

•Ensure the vehicle is in park or neutral and on a flat surface during the process.

1
Ensure the vehicle is in the 'OFF' position and the key is removed from the ignition.
2
Insert the key into the ignition without starting the engine or press the 'Start' button twice without pressing the brake pedal.
3
Locate the trip meter reset button on the instrument panel.
4
Press and hold the trip meter reset button until the trip meter displays '000000.'
5
Turn the ignition back to the 'OFF' position.
6
Turn the ignition back to the 'ON' position again to complete the reset process.

After completing the repair, verify that the issue has been resolved:

To prevent this issue from occurring again:

•Ensure the vehicle is parked on a flat surface and the ignition key is accessible.

No comments yet

Be the first to share your thoughts

Diagnostic Steps

1
Ensure the vehicle is in the 'OFF' position and the key is removed from the ignition.
2
Insert the key into the ignition without starting the engine or press the 'Start' button twice without pressing the brake pedal.
3
Locate the trip meter reset button on the instrument panel.
4
Press and hold the trip meter reset button until the trip meter displays '000000.'
5
Turn the ignition back to the 'OFF' position.
6
Turn the ignition back to the 'ON' position again to complete the reset process.

Solution

1. Preparation

Tools Required: None needed for this procedure.
Ensure the vehicle is parked on a flat surface and the ignition key is accessible.

2. Reset the Maintenance Light

Insert Key or Press Start Button:
- Insert the key into the ignition or press the "Start" button twice without pressing the brake pedal to turn on the electrical systems without starting the engine.
Access Trip Meter:
- Locate the trip meter reset button on the instrument cluster. This is usually a small button located near the odometer.
Reset Trip Meter:
- Press and hold the trip meter reset button. Keep holding it until the trip meter changes to "000000."
Turn Off Ignition:
- Turn the ignition key to the "OFF" position or turn off the electrical systems if using the start button.
Complete the Reset:
- Turn the ignition back to the "ON" position to ensure that the maintenance light is no longer illuminated.