FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to reset the maintenance light on Toyota Camry XV50 (2012-2017) - Toyota Camry
Home/Cars/Toyota/Camry/XV70 (2018-2024)/how to reset the maintenance light on Toyota Camry XV50 (2012-2017)

how to reset the maintenance light on Toyota Camry XV50 (2012-2017)

Toyota Camry XV70 (2018-2024)

Error Codes
5-10 minutes
Time
easy
Difficulty
low
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
2 min read
379 words

Problem Statement

Learn how to reset the maintenance light on your 2012-2017 Toyota Camry XV50 after completing scheduled maintenance. Step-by-step guide included.

Affected Component
Electrical
Estimated Time
5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure the vehicle is in a safe, stationary position while performing the reset

Symptoms

  • •Maintenance light illuminated on the dashboard
  • •Message display indicating maintenance is due
  • •Reminder for oil change or other scheduled service

Diagnostic Steps

  1. 1
  2. 2
  3. 3

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •None required specifically for resetting the maintenance light.

Parts Required

  • •None required for resetting the maintenance light.

Additional Information

Affected Component
Electrical
Estimated Time
5-10 minutes
Difficulty
easy
Severity
low
Tools Required
1 item
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Ensure the vehicle is parked safely and the ignition is turned to the "ON" position without starting the engine.
2. Resetting the Maintenance Light
  1. Turn the Ignition ON: Press the ignition button or turn the key to the "ON" (not "START") position.
  2. Set the Odometer Display:
    • Press the odometer/trip meter button until the odometer reading is displayed (not the trip meter).
  3. Turn the Ignition Off: Turn the ignition key to the "OFF" position.
  4. Press and Hold the Odometer Button: While holding the odometer button, turn the ignition back to the "ON" position.
  5. Wait for the Maintenance Light to Flash: Continue holding the button until the maintenance light blinks and then turns off. This usually takes about 10 seconds.
  6. Release the Odometer Button: Once the maintenance light has turned off, release the button.
3. Confirm the Reset
  • Turn the ignition off and then back on to ensure the maintenance light remains off.