how to reset the maintenance light on Toyota Camry XV50 (2012-2017)

Toyota Camry XV70 (2018-2024)

Error Codes

5-10 minutes

Time

easy

Difficulty

low

Severity

2 min read

386 words

Problem Statement

Learn how to reset the maintenance light on Toyota Camry XV50 (2012-2017) with this step-by-step guide. Quick and easy instructions for a successful reset.

Affected Component

Electrical

Estimated Time

5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in 'Park' and the ignition is off before starting the reset procedure.

Symptoms

•Maintenance light is illuminated on the dashboard
•No warning codes are present in the OBD-II system
•Recent maintenance service has been performed (e.g., oil change, filter replacement)

Diagnostic Steps

1
Turn the ignition switch to the 'ON' position without starting the engine.
2
Ensure that the odometer is displayed on the instrument cluster.
3
Turn off the ignition.
4
Press and hold the trip reset button on the odometer.
5
While holding the trip reset button, turn the ignition switch back to the 'ON' position.
6
Continue to hold the trip reset button until the maintenance light resets, which usually takes about 10 seconds.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None required

Parts Required

•None required

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Turn the ignition switch to the 'ON' position without starting the engine.
2
Ensure that the odometer is displayed on the instrument cluster.
3
Turn off the ignition.
4
Press and hold the trip reset button on the odometer.
5
While holding the trip reset button, turn the ignition switch back to the 'ON' position.
6
Continue to hold the trip reset button until the maintenance light resets, which usually takes about 10 seconds.

Solution

1. Preparation

Ensure the vehicle is in a safe location and the ignition is off.
Gather necessary tools: none required for this process.

2. Reset Maintenance Light

Turn the ignition switch to the "ON" position (do not start the engine).
Verify that the odometer reading is displayed.
Turn off the ignition completely.
Press and hold the trip reset button located on the instrument cluster.
While holding the trip reset button, turn the ignition switch to the "ON" position.
Keep the trip reset button pressed for approximately 10 seconds until the maintenance light turns off.
Release the trip reset button.

3. Final Check

Turn off the ignition once again and then restart the vehicle.
Ensure that the maintenance light is no longer illuminated.