how to reset the maintenance light on my Toyota Camry XV70 (2018-2024)

Toyota Camry XV70 (2018-2024)

5-10 minutes

Time

easy

Difficulty

low

Severity

2 min read

340 words

Problem Statement

Learn how to reset the maintenance light on your Toyota Camry XV70 (2018-2024) after maintenance. Step-by-step guide for a quick reset.

Affected Component

Electrical

Estimated Time

5-10 minutes

Important safety information - read before proceeding

•Ensure the vehicle is in 'Park' mode and the ignition is off during the reset process.

1
Turn the ignition switch to the 'ON' position (do not start the engine).
2
Use the odometer button to display the current mileage.
3
Turn the ignition off and then back to 'ON' while holding the odometer button.
4
Continue holding the odometer button until the maintenance light blinks and goes out.
5
Release the odometer button once the light resets.

After completing the repair, verify that the issue has been resolved:

To prevent this issue from occurring again:

No comments yet

Be the first to share your thoughts

Diagnostic Steps

1
Turn the ignition switch to the 'ON' position (do not start the engine).
2
Use the odometer button to display the current mileage.
3
Turn the ignition off and then back to 'ON' while holding the odometer button.
4
Continue holding the odometer button until the maintenance light blinks and goes out.
5
Release the odometer button once the light resets.

Solution

1. Preparation

2. Reset the Maintenance Light

Turn Ignition On
- Turn the ignition switch to the "ON" position without starting the engine.
Display Odometer
- Press the odometer button until the current mileage is displayed.
Turn Ignition Off
- Turn the ignition switch to the "OFF" position.
Initiate Reset Mode
- Turn the ignition back to the "ON" position while pressing and holding the odometer button.
Complete Reset
- Continue holding the odometer button until the maintenance light blinks and then turns off. This may take about 10 seconds.
- Release the odometer button.