how to reset the maintenance light on my Toyota Camry XV70 (2018-2024)

Toyota Camry XV70 (2018-2024)

Error Codes

5-10 minutes

Time

easy

Difficulty

low

Severity

2 min read

353 words

Problem Statement

Learn how to reset the maintenance light on your Toyota Camry XV70 (2018-2024) after an oil change. Step-by-step guide for a quick reset.

Affected Component

Electrical

Estimated Time

5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in 'Park' or 'Neutral' with the parking brake engaged before performing the reset.

Symptoms

•Maintenance light illuminated on the dashboard
•Vehicle service reminder displayed on the multi-information display
•No other diagnostic or warning lights active

Diagnostic Steps

1
Ensure the vehicle is in the 'ON' position without starting the engine.
2
Access the multi-information display using the steering wheel controls.
3
Navigate to the 'Settings' menu on the display.
4
Select 'Maintenance' and then 'Oil Change' or the relevant service option.
5
Confirm the reset option when prompted.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None specifically required for the reset.

Parts Required

•None required for the reset.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is in the 'ON' position without starting the engine.
2
Access the multi-information display using the steering wheel controls.
3
Navigate to the 'Settings' menu on the display.
4
Select 'Maintenance' and then 'Oil Change' or the relevant service option.
5
Confirm the reset option when prompted.

Solution

1. Preparation

Gather necessary tools: none required specifically for this task.
Ensure the vehicle is parked on a level surface with the engine turned off.

2. Access the Ignition

Insert the key into the ignition or press the "Start" button without pressing the brake pedal, allowing the vehicle to enter the "ON" position.

3. Reset the Maintenance Light

Use the steering wheel controls to navigate to the multi-information display.
Go to the "Settings" section using the “Up” or “Down” buttons.
Scroll to "Maintenance" and select it.
Choose "Oil Change" or the appropriate service interval to reset.
Confirm the reset when prompted by selecting "OK."

4. Verify the Reset

Turn off the ignition.
Restart the vehicle to ensure the maintenance light has been cleared.