FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to reset the maintenance light on my Toyota Camry XV50 (2012-2017) - Toyota Camry
Home/Cars/Toyota/Camry/XV70 (2018-2024)/how to reset the maintenance light on my Toyota Camry XV50 (2012-2017)

how to reset the maintenance light on my Toyota Camry XV50 (2012-2017)

Toyota Camry XV70 (2018-2024)

Error Codes
5-10 minutes
Time
easy
Difficulty
low
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
2 min read
301 words

Problem Statement

Learn how to reset the maintenance light on your 2012-2017 Toyota Camry XV50. Step-by-step guide to ensure your vehicle is ready for the road.

Affected Component
Electrical
Estimated Time
5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure the vehicle is in park and on a flat surface to prevent rolling

Symptoms

  • •Maintenance light remains illuminated on the dashboard
  • •Vehicle may display 'Maintenance Required' message
  • •No other engine or performance issues present

Diagnostic Steps

  1. 1
  2. 2
  3. 3

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •None required for this process

Parts Required

  • •None required for this process

Additional Information

Affected Component
Electrical
Estimated Time
5-10 minutes
Difficulty
easy
Severity
low
Tools Required
1 item
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Ensure the vehicle is in a safe and well-lit area.
  • Keep the vehicle in the "On" position without starting the engine.
2. Reset Maintenance Light
  1. Press and hold the trip meter reset button.
  2. While holding the button, turn the ignition key to the "On" position (do not start the engine).
  3. Continue to hold the trip meter button until the maintenance light starts to flash and then turns off.
  4. Release the trip meter reset button.
3. Verify Reset
  1. Turn off the ignition.
  2. Turn the ignition back to the "On" position and check that the maintenance light is no longer illuminated.