FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
How do I fix the windshield wipers that won't work on my 2019 Toyota Camry XV70? - Toyota Camry
Home/Cars/Toyota/Camry/XV70 (2018-2024)/How do I fix the windshield wipers that won't work on my 2019 Toyota Camry XV70?

How do I fix the windshield wipers that won't work on my 2019 Toyota Camry XV70?

Toyota Camry XV70 (2018-2024)

Error Codes
2-4 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
4 min read
633 words

Problem Statement

Learn how to diagnose and repair windshield wipers that won't work on your 2019 Toyota Camry XV70 with step-by-step instructions and required tools.

Affected Component
windshield wipers
Estimated Time
2-4 hours

Symptoms

  • •Windshield wipers do not move when activated.
  • •Wiper motor may make a clicking sound but does not function.
  • •Wipers may work intermittently or operate on only certain settings.
  • •No response from the wiper switch.

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
  7. 7
  8. 8
  9. 9
  10. 10
  11. 11

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Multimeter
  • •Fuse tester
  • •Screwdriver set (Philips and flathead)
  • •Pliers
  • •Trim removal tools
  • •Replacement fuses
  • •Replacement wiper motor (if needed)

Additional Information

Affected Component
windshield wipers
Estimated Time
2-4 hours
Difficulty
medium
Severity
medium
Tools Required
7 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Problem Diagnosis: Windshield Wipers Won't Work on 2019 Toyota Camry XV70
Tools Required
  • Multimeter
  • Fuse tester
  • Screwdriver set (Philips and flathead)
  • Pliers
  • Trim removal tools
  • Replacement fuses
  • Replacement wiper motor (if needed)
Repair Instructions

Step 1: Replace Blown Fuse

  • If a blown fuse was identified during diagnostics, replace it with a new fuse of the same amperage.
  • Test the wipers to see if they work.

Step 2: Repair or Replace Wiper Switch

  • If the wiper switch is faulty, follow these steps:
    1. Disconnect the negative battery terminal to ensure safety.
    2. Remove the steering column cover (usually requires a screwdriver).
    3. Disconnect the wiper switch harness.
    4. Remove the switch from the steering column.
    5. Install the new wiper switch and reconnect the harness.
    6. Reassemble the steering column and reconnect the battery.

Step 3: Replace Wiper Motor

  • If the wiper motor is found to be faulty:
    1. Disconnect the negative battery terminal.
    2. Remove the wiper arms by lifting the caps off the pivot points and unscrewing the nuts.
    3. Remove the plastic cover at the base of the windshield.
    4. Unplug the motor connector and remove the motor mounting bolts.
    5. Install the new wiper motor in the reverse order of removal.
    6. Reattach the wiper arms, ensuring they are positioned correctly.
    7. Reconnect the battery and test the wipers.

Step 4: Repair Wiper Transmission

  • If the linkage is damaged:
    1. Remove the wiper motor and inspect the linkage.
    2. Replace any broken components.
    3. Reassemble and test the wipers.
Final Testing
  • After completing repairs, test the wipers in all modes (off, intermittent, low, and high) to ensure proper function.
  • Check for any abnormal noises during operation.
Conclusion

If the windshield wipers still do not function after these repairs, further diagnosis may be necessary, potentially involving inspection of the wiring harness for shorts or breaks. If needed, consult a professional technician for advanced diagnostic procedures.