FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
How do I fix a faulty windshield wiper system in my 2018 Toyota Camry XV70? - Toyota Camry
Home/Cars/Toyota/Camry/XV70 (2018-2024)/How do I fix a faulty windshield wiper system in my 2018 Toyota Camry XV70?

How do I fix a faulty windshield wiper system in my 2018 Toyota Camry XV70?

Toyota Camry XV70 (2018-2024)

Error Codes
2-4 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
4 min read
684 words

Problem Statement

Learn how to diagnose and repair a faulty windshield wiper system in your 2018 Toyota Camry XV70 with step-by-step instructions and required tools.

Affected Component
windshield wiper system
Estimated Time
2-4 hours

Symptoms

  • •Wipers do not operate at all.
  • •Wipers operate intermittently without control.
  • •Wipers only work on one speed.
  • •Wipers make a grinding noise when activated.
  • •Wipers do not return to the parked position.

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Flathead screwdriver
  • •Phillips screwdriver
  • •Pliers
  • •Multimeter
  • •Replacement fuses (if needed)
  • •Replacement wiper motor (if needed)
  • •Replacement wiper switch (if needed)
  • •Torque wrench (for reinstallation of wiper arms)

Additional Information

Affected Component
windshield wiper system
Estimated Time
2-4 hours
Difficulty
medium
Severity
medium
Tools Required
8 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation

Fixing a Faulty Windshield Wiper System in a 2018 Toyota Camry XV70

Tools Required
  • Flathead screwdriver
  • Phillips screwdriver
  • Pliers
  • Multimeter
  • Replacement fuses (if needed)
  • Replacement wiper motor (if needed)
  • Replacement wiper switch (if needed)
  • Torque wrench (for reinstallation of wiper arms)
Repair Instructions
Step 1: Replace Wiper Blades (if worn)
  1. Lift the wiper arm away from the windshield.
  2. Press the tab on the wiper blade and slide it off the arm.
  3. Align the new wiper blade and slide it onto the arm until it clicks.
  4. Lower the wiper arm back onto the windshield.
Step 2: Replace the Wiper Fuse
  1. Open the fuse box cover.
  2. Remove the wiper fuse using pliers.
  3. Inspect and replace with a new fuse of the same amperage.
  4. Close the fuse box and test the wipers.
Step 3: Replace the Wiper Switch
  1. Disconnect the negative battery terminal.
  2. Remove the steering column cover (use a screwdriver).
  3. Disconnect the wiper switch wiring harness.
  4. Remove the screws holding the wiper switch in place.
  5. Install the new wiper switch and reconnect the harness.
  6. Reassemble the steering column cover and reconnect the battery.
Step 4: Replace the Wiper Relay
  1. Open the fuse box and locate the wiper relay.
  2. Pull out the faulty relay and replace it with a new one.
  3. Test the wipers to ensure they operate correctly.
Step 5: Replace the Wiper Motor (if necessary)
  1. Remove the wiper arms using a flathead screwdriver to pry off the cap and a socket wrench to remove the nut.
  2. Disconnect the wiper motor connector.
  3. Remove the motor mounting bolts using a socket wrench.
  4. Replace with a new wiper motor, reattach the bolts, and reconnect the wiring.
  5. Reinstall the wiper arms and test the system.
Step 6: Inspect and Repair Wiper Linkage (if necessary)
  1. If the wipers are still malfunctioning, inspect the linkage.
  2. Remove the wiper motor (if not already done).
  3. Check for any binding or broken components in the linkage.
  4. Lubricate or replace any damaged parts as necessary.
  5. Reassemble and test.
Final Testing
  • After completing repairs, test the windshield wiper system in all modes (low, high, and intermittent).
  • Ensure that the wipers return to the parked position and operate smoothly.
Conclusion

By following these steps, you should be able to diagnose and repair the faulty windshield wiper system in your 2018 Toyota Camry XV70 effectively. If issues persist after all repairs, consider consulting with a professional technician for further diagnostics.