FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
How can I fix the windshield wipers not working in my Toyota Camry XV70? - Toyota Camry
Home/Cars/Toyota/Camry/XV70 (2018-2024)/How can I fix the windshield wipers not working in my Toyota Camry XV70?

How can I fix the windshield wipers not working in my Toyota Camry XV70?

Toyota Camry XV70 (2018-2024)

Error Codes
2-3 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
4 min read
729 words

Problem Statement

Learn how to diagnose and repair windshield wipers not working on Toyota Camry XV70 (2018-2024) with step-by-step instructions.

Affected Component
windshield wiper system
Estimated Time
2-3 hours

Symptoms

  • •Wipers not activating
  • •Intermittent operation
  • •No sound from wiper motor

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Multimeter
  • •Screwdrivers (flathead and Phillips)
  • •Pliers
  • •Socket set
  • •Replacement fuses (if necessary)
  • •Wiper motor (if replacement is required)
  • •Wiring diagram (for reference, if needed)

Additional Information

Affected Component
windshield wiper system
Estimated Time
2-3 hours
Difficulty
medium
Severity
medium
Tools Required
7 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation

Fixing Windshield Wipers Not Working on Toyota Camry XV70 (2018-2024)

Tools Required
  • Multimeter
  • Screwdrivers (flathead and Phillips)
  • Pliers
  • Socket set
  • Replacement fuses (if necessary)
  • Wiper motor (if replacement is required)
  • Wiring diagram (for reference, if needed)
Repair Instructions
Step 1: Check Wiper Control Stalk
  1. Position the Vehicle: Ensure the vehicle is in a safe position, parked, and turned off.
  2. Engage Wipers: Turn on the ignition and activate the wiper stalk through all settings. Listen for any sounds from the motor or relay.
Step 2: Inspect Fuses
  1. Locate Fuse Box: Open the driver's side door and locate the fuse box, typically found under the dashboard or near the driver's left foot.
  2. Identify Wiper Fuse: Refer to the fuse box diagram (usually found on the cover or in the owner's manual) to locate the wiper fuse.
  3. Check the Fuse: Remove the fuse and visually inspect it. If the metal filament is broken, replace it with a new fuse of the same amperage.
Step 3: Test Wiper Motor
  1. Access Wiper Motor: Open the hood and remove any necessary covers to access the wiper motor.
  2. Disconnect Wiring Harness: Unplug the connector from the wiper motor.
  3. Test for Voltage: Using a multimeter, set it to the DC voltage setting.
    • Connect the red lead to the positive terminal and the black lead to the ground.
    • Activate the wipers while measuring voltage at the motor connector. You should see battery voltage (~12V). If not, there may be an issue with the wiring or the switch.
Step 4: Examine Wiring
  1. Inspect Wiring Harness: Look for any frayed wires, loose connections, or corrosion at the connector. Repair any damaged wiring as necessary.
  2. Check Ground Connection: Ensure the ground connection for the wiper motor is secure and free of corrosion.
Step 5: Check Linkage
  1. Inspect Wiper Linkage: Ensure the wiper arms are properly connected to the linkage. If they are loose, tighten them.
  2. Check for Breaks: Look for any breaks or bends in the linkage that could impede wiper function.
Step 6: Look for Obstructions
  1. Remove Debris: Clear any leaves or debris that may be obstructing the wiper arms.
  2. Check for Ice: If it’s winter, ensure that ice is not preventing the wipers from moving. Gently thaw any ice before attempting to operate the wipers.
Step 7: Replace Wiper Motor (if necessary)
  1. Remove Wiper Arms: If the motor is faulty, you may need to remove the wiper arms by loosening the nuts securing them to the spindle.
  2. Unbolt Motor: Remove any bolts securing the motor to the vehicle.
  3. Install New Motor: Position the new motor in place, secure it with bolts, and reconnect the wiring harness.
  4. Reinstall Wiper Arms: Replace the wiper arms and tighten the nuts securely.
Step 8: Test the Wipers
  1. Reinstall Fuse: If a fuse was replaced, ensure it's properly seated.
  2. Start the Vehicle: Turn on the ignition and test the wipers through all settings to ensure proper operation.
Conclusion

If the wipers operate correctly after following the above steps, you have successfully diagnosed and repaired the issue. If problems persist, it may require professional diagnosis as it could be related to the wiper control module or other electrical issues.