How can I fix the trunk release not working in my 2019 Toyota Camry XV70?

Toyota Camry XV70 (2018-2024)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

4 min read

710 words

Problem Statement

Learn how to diagnose and fix the trunk release issue in your 2019 Toyota Camry XV70 with detailed steps and required tools.

Affected Component

trunk release mechanism

Estimated Time

2-4 hours

Symptoms

•The trunk does not open when the trunk release button is pressed on the key fob.
•The trunk release button inside the vehicle does not function.
•The trunk can still be opened manually using the key or by using the physical keyhole.

Diagnostic Steps

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Multimeter
•Flathead screwdriver
•Phillips screwdriver
•10mm socket and ratchet
•Trim removal tools
•Replacement fuses (if necessary)
•Replacement relay (if necessary)
•Replacement actuator (if necessary)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

Fixing the Trunk Release Not Working in a 2019 Toyota Camry XV70

Symptoms:

The trunk does not open when the trunk release button is pressed on the key fob.
The trunk release button inside the vehicle does not function.
The trunk can still be opened manually using the key or by using the physical keyhole.

Tools Required

Multimeter
Flathead screwdriver
Phillips screwdriver
10mm socket and ratchet
Trim removal tools
Replacement fuses (if necessary)
Replacement relay (if necessary)
Replacement actuator (if necessary)

Repair Instructions

1. Replace the Key Fob Battery

Step 1: Use a flathead screwdriver to gently pry open the key fob.
Step 2: Remove the old battery and replace it with a new CR2032 battery, ensuring the positive side is facing up.
Step 3: Reassemble the key fob and test the trunk release function.

2. Inspect and Clean the Trunk Release Button

Step 1: If the button feels sticky or unresponsive, use a suitable cleaner to clean the area around the button.
Step 2: Check for any mechanical issues. If damaged, consider replacing the button assembly.

3. Check and Replace the Trunk Release Relay

Step 1: Locate the fuse box (typically under the dashboard or in the engine compartment).
Step 2: Identify the correct relay for the trunk release (refer to the owner's manual).
Step 3: Remove the relay and test it with a multimeter for continuity. Replace if faulty.

4. Inspect and Replace Fuses

Step 1: Use a fuse puller or needle-nose pliers to remove the trunk release fuse.
Step 2: Inspect the fuse for continuity. Replace with an identical fuse if blown.

5. Examine Wiring and Connections

Step 1: Check the wiring harness leading to the trunk release actuator for any damage or corrosion.
Step 2: Repair any damaged sections with electrical tape or replace the wiring if necessary.

6. Test and Replace the Trunk Release Actuator

Step 1: If the actuator is suspected to be faulty, disconnect the wiring harness connected to it.
Step 2: Use a multimeter to check for voltage when the trunk release button is pressed.
Step 3: If voltage is present but the actuator does not respond, replace the actuator.
- Step 4: To replace the actuator:
- Step 5: Remove the trunk lining using trim removal tools and screws (if applicable).
- Step 6: Unbolt the old actuator from its position (usually secured with a 10mm bolt).
- Step 7: Install the new actuator in reverse order and reassemble the trunk lining.

Final Steps

After all repairs, test the trunk release function multiple times using both the key fob and interior button.
Ensure all components are securely re-installed and that the trunk operates smoothly.

By following these detailed steps, you should be able to diagnose and fix the trunk release issue on your 2019 Toyota Camry XV70 effectively.