FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
How can I fix the dashboard lights not working in my 2019 Toyota Camry? - Toyota Camry
Home/Cars/Toyota/Camry/XV70 (2018-2024)/How can I fix the dashboard lights not working in my 2019 Toyota Camry?

How can I fix the dashboard lights not working in my 2019 Toyota Camry?

Toyota Camry XV70 (2018-2024)

Error Codes
2-3 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
4 min read
646 words

Problem Statement

Learn how to diagnose and fix dashboard lights not working in your 2019 Toyota Camry with our step-by-step guide.

Affected Component
dashboard lights
Estimated Time
2-3 hours

Symptoms

  • •Dashboard lights are completely off.
  • •Instrument cluster gauges may still function, but without backlighting.
  • •Warning lights may not be illuminated.
  • •Dimmer switch may not affect the brightness of the dashboard lights.

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Multimeter
  • •OBD-II Scanner
  • •Screwdrivers (Phillips and flathead)
  • •Torx screwdriver set
  • •Trim removal tool
  • •Safety gloves
  • •Flashlight

Additional Information

Affected Component
dashboard lights
Estimated Time
2-3 hours
Difficulty
medium
Severity
medium
Tools Required
7 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Fixing Dashboard Lights Not Working in a 2019 Toyota Camry
Tools Required
  • Multimeter
  • OBD-II Scanner
  • Screwdrivers (Phillips and flathead)
  • Torx screwdriver set
  • Trim removal tool
  • Safety gloves
  • Flashlight (for visibility)
Repair Instructions

Step 1: Check the Dimmer Switch

  1. Locate the Dimmer Switch: Found on the dashboard, typically near the headlight controls.
  2. Adjust Brightness: Turn the dimmer switch to its maximum setting. Check if the dashboard lights illuminate.

Step 2: Inspect the Fuse

  1. Access the Fuse Box: Open the driver’s side door and locate the fuse box cover, typically near the left side of the dashboard.
  2. Remove the Cover: Use a flathead screwdriver if necessary to pry open the cover gently.
  3. Check the Instrument Panel Fuse: Refer to the fuse diagram on the inside of the cover or in the owner’s manual. Check the specified fuse.
    • If Blown: Replace with a fuse of the same amperage (usually a 10A or 15A fuse).
    • If Intact: Move on to the next step.

Step 3: Inspect Bulbs in the Instrument Cluster

  1. Remove the Dashboard Trim: Use a trim removal tool to gently pry off the trim surrounding the instrument cluster without damaging it.
  2. Unscrew the Instrument Cluster: Locate and remove screws securing the instrument cluster using a Torx screwdriver.
  3. Disconnect the Cluster: Carefully pull the cluster towards you; disconnect the wiring harness from the back.
  4. Replace Bulbs: Inspect the bulbs. If any are burnt out, replace them with new ones. Ensure they are properly seated.

Step 4: Check Wiring and Connectors

  1. Inspect Connectors: While the cluster is removed, check the connectors for corrosion, loose connections, or physical damage.
  2. Test Wiring: Use a multimeter to check for continuity in the wires leading to the dashboard lights.

Step 5: Scan for Error Codes

  1. Connect OBD-II Scanner: Plug the scanner into the OBD-II port, usually located under the dashboard near the steering column.
  2. Check for Codes: Follow the scanner's instructions to retrieve any error codes. Investigate any codes related to the cluster or electrical system.
Final Assembly
  1. Reassemble the Dashboard: Once all checks and repairs are completed, reconnect the instrument cluster and secure it with screws.
  2. Reattach Dashboard Trim: Carefully snap the trim back into place.
  3. Test the Dashboard Lights: Turn on the ignition and check if the dashboard lights are functioning properly.
Conclusion

If, after all these steps, the dashboard lights still do not work, the issue may be more complex, such as a malfunctioning body control module or deeper electrical issues. In this case, seeking professional assistance from a qualified automotive technician may be necessary.