FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
How can I fix a non-working dashboard light in the 2019 Toyota Camry XV70? - Toyota Camry
Home/Cars/Toyota/Camry/XV70 (2018-2024)/How can I fix a non-working dashboard light in the 2019 Toyota Camry XV70?

How can I fix a non-working dashboard light in the 2019 Toyota Camry XV70?

Toyota Camry XV70 (2018-2024)

Error Codes
1-2 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
4 min read
619 words

Problem Statement

Learn how to diagnose and repair a non-working dashboard light in your 2019 Toyota Camry XV70 with step-by-step instructions.

Affected Component
dashboard lights
Estimated Time
1-2 hours

Symptoms

  • •Dashboard light(s) not illuminating when the vehicle is turned on.
  • •Specific warning lights (e.g., check engine, oil pressure) not illuminating when issues are present.
  • •Other dashboard indicators functioning normally.

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Multimeter
  • •Fuse puller or needle-nose pliers
  • •Screwdrivers (Phillips and flathead)
  • •Replacement fuse (if necessary)
  • •Replacement bulbs (if necessary)

Additional Information

Affected Component
dashboard lights
Estimated Time
1-2 hours
Difficulty
medium
Severity
medium
Tools Required
5 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation

Fixing a Non-Working Dashboard Light in a 2019 Toyota Camry XV70

If you're experiencing a non-working dashboard light in your 2019 Toyota Camry XV70, it can be due to several reasons such as a blown fuse, burnt-out bulb, or an issue with the dashboard light control. Below are the detailed steps to diagnose and repair the issue.

Required Tools
  • Multimeter
  • Fuse puller or needle-nose pliers
  • Screwdrivers (Phillips and flathead)
  • Replacement fuse (if necessary)
  • Replacement bulbs (if necessary)
Repair Instructions
Step 1: Checking and Replacing the Fuse

  1. Remove the Fuse:

    • Use the fuse puller or needle-nose pliers to extract the dashboard light fuse from the fuse box.

  2. Inspect the Fuse:

    • Check if the metal strip inside the fuse is intact or broken. If broken, it indicates a blown fuse.

  3. Replace with New Fuse:

    • Obtain a replacement fuse of the same amperage (specified in the owner’s manual).
    • Insert the new fuse into the same slot.

  4. Test the Dashboard Lights:

    • Start the vehicle and check if the dashboard lights are functioning.
Step 2: Checking and Replacing the Dashboard Bulbs

If the fuse is good but the lights still do not work, the issue may be a burnt-out bulb.

  1. Remove the Dashboard Cover:

    • Use a screwdriver to remove screws securing the dashboard panel (if applicable).
    • Carefully pry off the dashboard cover to access the bulbs.

  2. Locate the Bulbs:

    • Identify the specific bulbs related to the non-working indicators. These are commonly housed in sockets behind the dashboard.

  3. Remove the Bulb:

    • Gently twist or pull the bulb socket to remove it from the dashboard. Be cautious to avoid damaging the socket.

  4. Replace the Bulb:

    • Replace the old bulb with a new one of the same type (check the owner’s manual for specifications).
    • Reinsert the bulb socket back into its housing.

  5. Reassemble the Dashboard:

    • Replace the dashboard cover and secure it with screws.

  6. Test the Dashboard Lights:

    • Start the vehicle and check if the dashboard lights illuminate properly.
Final Steps

If after replacing the fuse and bulbs the dashboard lights still do not work, the issue might be more complex involving wiring or the dashboard control module. In that case, further diagnosis with advanced tools and potentially a visit to a certified technician may be necessary.

Note: Always consult the vehicle’s owner manual for specific instructions and fuse ratings. If any electrical work is beyond your skill level, consider seeking professional assistance.