FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
What could cause my 2022 Toyota Camry to make a popping sound while driving? - Toyota Camry
Home/Cars/Toyota/Camry/Eighth Generation (2018-present)/What could cause my 2022 Toyota Camry to make a popping sound while driving?

What could cause my 2022 Toyota Camry to make a popping sound while driving?

Toyota Camry Eighth Generation (2018-present)

Error Codes
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
4 min read
711 words

Problem Statement

Learn how to diagnose and repair the popping sound in your 2022 Toyota Camry with detailed steps and required tools.

Affected Component
suspension, CV joint, exhaust system, tires, engine mounts

Symptoms

  • •Popping sound while driving, particularly when turning or going over bumps
  • •Sound may vary with speed or steering angle
  • •Possible accompanying symptoms such as vibrations or changes in handling

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Flashlight
  • •basic hand tools (wrenches, sockets)
  • •wrench set
  • •pry bar
  • •tire pressure gauge
  • •lug wrench
  • •jack
  • •jack stands
  • •socket set
  • •torque wrench
  • •CV joint replacement kit
  • •exhaust clamps
  • •replacement hangers or pipes

Additional Information

Affected Component
suspension, CV joint, exhaust system, tires, engine mounts
Difficulty
medium
Severity
medium
Tools Required
13 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnosis and Repair of Popping Sound in 2022 Toyota Camry

Potential Causes
  1. Loose or Damaged Suspension Components
  2. CV Joint Issues
  3. Exhaust System Issues
  4. Tires and Wheel Well Interference
  5. Engine Mounts or Transmission Mounts
Step 1: Visual Inspection
  • Tools Required: Flashlight, basic hand tools (wrenches, sockets).
  • Inspect the undercarriage for any visible damage or loose components.
  • Check suspension components such as control arms, struts, and sway bar links for wear or looseness.
  • Inspect CV joints for torn boots or grease leakage.
Step 2: Check Exhaust System
  • Tools Required: Wrench set, pry bar.
  • Inspect the exhaust system from the engine to the tailpipe.
  • Look for any loose hangers, clamps, or damaged sections of the exhaust that may cause rattling or popping sounds.
Step 3: Tire and Wheel Inspection
  • Tools Required: Tire pressure gauge, lug wrench, jack, jack stands.
  • Check tire pressure and ensure all tires are inflated to the specified PSI.
  • Inspect the wheel wells for any debris or signs of tire rubbing against the fender or suspension components.
  • Remove the wheels and check for any damage to the brake components or wheel bearings.
Step 4: Test Drive
  • Perform a test drive to replicate the symptoms.
  • Listen for the popping sound while making tight turns and going over bumps.
  • Pay attention to whether the sound is more prominent on one side of the vehicle.
Step 5: Inspect Engine and Transmission Mounts
  • Tools Required: Wrench set, pry bar.
  • Visually inspect the engine and transmission mounts for signs of wear or damage.
  • Use a pry bar to gently lift the engine/transmission and check for excessive movement.
Repair Instructions
Repairing Loose or Damaged Suspension Components
  1. Gather Tools: Socket set, torque wrench, replacement parts as necessary (e.g., control arms, bushings).
  2. Jack up the Vehicle: Securely place jack stands under the vehicle.
  3. Remove Affected Parts: Follow the manufacturer’s service manual for specific disassembly procedures.
  4. Replace or Tighten Components: Replace any worn bushings or components. Torque to manufacturer specifications.
  5. Reassemble and Test Drive: Reassemble parts and perform a test drive to ensure the issue is resolved.
Replacing a Damaged CV Joint
  1. Gather Tools: CV joint replacement kit, socket set, torque wrench, pry bar, jack stands.
  2. Remove Wheel: Jack up the vehicle, secure with jack stands, and remove the affected wheel.
  3. Disconnect CV Axle: Remove the axle nut and disconnect the CV joint from the transmission and hub.
  4. Install New CV Joint: Follow the manufacturer’s instructions to install the new CV joint.
  5. Reassemble and Test Drive: Reassemble the wheel and test drive to check for noise.
Fixing Exhaust System Issues
  1. Gather Tools: Wrench set, exhaust clamps, replacement hangers or pipes as needed.
  2. Inspect and Identify: Identify the section causing the noise.
  3. Tighten or Replace: If loose, tighten the clamps or hangers. Replace any damaged sections if necessary.
  4. Reassemble and Test Drive: Once repairs are made, test drive to ensure the popping sound is eliminated.
Addressing Tire and Wheel Issues
  1. Inspect and Replace Tires: If tires are worn or damaged, replace them.
  2. Correct Alignment Issues: If tires are rubbing due to alignment, consider a wheel alignment.
  3. Test Drive: After making corrections, perform a test drive to ensure the sound is resolved.
Replacing Engine or Transmission Mounts
  1. Gather Tools: Mount replacement parts, socket set, jack, jack stands.
  2. Lift and Support Engine: Use a jack to lift and support the engine to relieve pressure on the mounts.
  3. Remove Old Mounts: Unbolt and remove old mounts.
  4. Install New Mounts: Install new mounts and torque to required specifications.
  5. Reassemble and Test Drive: Reassemble any removed components and test drive.
Conclusion

If the popping sound persists after following these diagnostics and repair steps, further investigation may be required, and it could be beneficial to consult a professional technician for advanced diagnostics.