FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
What could cause my 2019 Toyota Camry to have a delay in shifting gears? - Toyota Camry
Home/Cars/Toyota/Camry/Eighth Generation (2018-present)/What could cause my 2019 Toyota Camry to have a delay in shifting gears?

What could cause my 2019 Toyota Camry to have a delay in shifting gears?

Toyota Camry Eighth Generation (2018-present)

Error Codes
2-4 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
4 min read
652 words

Problem Statement

Learn how to diagnose and fix gear shift delay issues in your 2019 Toyota Camry with detailed steps and required tools.

Affected Component
Transmission
Estimated Time
2-4 hours

Symptoms

  • •Delayed Shifting
  • •Harsh Shifts
  • •Check Engine Light
  • •Unusual Noises
  • •Slipping Gears
  • •Increased RPMs

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
  7. 7
  8. 8

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Transmission fluid dipstick
  • •Funnel
  • •Basic hand tools
  • •Torque wrench
  • •Multimeter

Additional Information

Affected Component
Transmission
Estimated Time
2-4 hours
Difficulty
medium
Severity
medium
Tools Required
6 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Step 1: Preliminary Checks

  • Visual Inspection:

    • Check for any visible fluid leaks under the vehicle.
    • Inspect the transmission fluid level and condition (should be a bright red color and not smell burnt).

  • Check Engine Light:

    • Use an OBD-II scanner to check for any diagnostic trouble codes (DTCs) related to the transmission.

Tools Required

  • OBD-II scanner.
  • Transmission fluid dipstick (if applicable).
  • Funnel for adding fluid.
  • Basic hand tools (wrenches, sockets).
  • Torque wrench.
  • Multimeter (for electrical diagnostics, if needed).

Step 2: Transmission Fluid Assessment

  1. Check Fluid Level:

    • Ensure the vehicle is on a level surface.
    • Start the engine and let it warm up to operating temperature.
    • With the engine running, pull the dipstick (if applicable) and check the fluid level. Add fluid if low.

  2. Inspect Fluid Condition:

    • If the fluid appears dark, burnt, or contaminated, a transmission fluid change may be necessary.

Step 3: Electrical System Check

  1. Inspect Transmission Range Sensor:

    • This sensor determines the position of the gear selector.
    • Use a multimeter to test for continuity and proper voltage at the sensor connector.
    • Replace if faulty.

  2. Check Wiring and Connectors:

    • Inspect wiring harnesses and connectors for any signs of damage or corrosion, particularly around the transmission area.

Step 4: Transmission Control Module (TCM) Diagnostics

  1. Scan for Codes:

    • Use the OBD-II scanner to check for any transmission-related codes, which may indicate issues with the TCM or other related components.

  2. Reset the TCM:

    • If codes are present, clear them and take the vehicle for a test drive to see if the issue persists.
Repair Instructions

Step 1: Fluid Change (if needed)

  1. Drain the Old Fluid:

    • Support the vehicle on jack stands.
    • Remove the transmission pan bolts and drain the fluid into a suitable container.

  2. Replace Transmission Filter:

    • Remove the old filter (if applicable) and install the new one.

  3. Reinstall Transmission Pan:

    • Clean the pan and replace the gasket or use RTV sealant.
    • Torque the pan bolts to manufacturer specifications.

  4. Refill Transmission Fluid:

    • Using a funnel, refill the transmission with the appropriate type of fluid recommended for your vehicle.

Step 2: Replace Faulty Components (if identified)

  1. Replace Transmission Range Sensor:

    • Disconnect the sensor’s electrical connector.
    • Remove any mounting screws or bolts and replace the sensor.
    • Reconnect the electrical connector.

  2. Repair or Replace Wiring:

    • Repair any damaged wires or replace connectors as needed.

Step 3: TCM Reprogramming (if necessary)

  • If the TCM is suspected to be faulty or if a new one was installed, it may require reprogramming using a specialized scanner or by the dealership.
Final Steps

  1. Test Drive:

    • After repairs are complete, take the vehicle for a test drive to ensure that the shifting delay is resolved.

  2. Recheck Fluid Level:

    • After the test drive, recheck the transmission fluid level and top off if necessary.

  3. Monitor for Issues:

    • Keep an eye on the vehicle for any recurring symptoms over the next few days.

By following these detailed steps, you can diagnose and potentially resolve the gear shift delay issue in your 2019 Toyota Camry. If the problem persists after these checks and repairs, further investigation by a qualified technician may be necessary.